Filtration Pilot Plant

Order Code: 32483

Category: Environmental Trainers

Tesca Filtration Pilot Plant 32483 mainly consists of a sand fi lter and of an activated carbon filter; filtered water is collected into a tank of stainless steel from which samples for proper laboratory analyses can be extracted. An in-line turbidim...



SPECIFICATION

Tesca Filtration Pilot Plant 32483 mainly consists of a sand fi lter and of an activated carbon filter; filtered water is collected into a tank of stainless steel from which samples for proper laboratory analyses can be extracted. An in-line turbidimeter enables to measure the turbidity of water fl owing in and out of filters.
Process control, data acquisition and supervision are automatically carried out by a microprocessor controller and by a specific control and supervision software (only for automatic plant) that enables the remote control of various operational parameters.

 

Specifications

  • Framework of AISI 304 stainless steel with castors
  • Sand filter of borosilicate glass with decreasing particle size and capacity of 30 l
  • Activated carbon filter of borosilicate glass with capacity of 30 l
  • 4 pressure gauges, with range of 0 to 10 m of water column
  • Centrifugal pump with casing and rotor of AISI 304 stainless steel and flow-rate of 3000 l/h
  • Variable area flowmeter of AISI 304 stainless steel, with range of 100 to 1000 l/h
  • Metering pump of plastic material for sodium hypochlorite, with flow rate of 3 l/h
  • Metering pump of plastic material for flocculant, with flowrate of 3 l/h
  • 2 feed tanks of AISI 304 stainless steel with capacity of 120 l
  • Tank of AISI 304 stainless steel for collecting the filtered water with capacity of 200 l
  • Thermo-resistance Pt 100 with sheath of AISI 316 stainless steel
  • Board-type electronic temperature indicator
  • Connecting lines and valves of AISI 304 and 316 stainless steel Besides being provided with all the technical characteristics of optional automatic, this model also includes the following additional equipment:
  • Pneumatic control valve of stainless steel AISI 316 for feed flow rate of water, Cv = 2.5
  • Electro-pneumatic converter (4 to 20 A / 0.2 to 1 bar)
  • Digital microprocessor PID controller
  • Electronic turbidimeter for measuring the turbidity of the water fl owing in and out of filters, with programmable range and 4 to 20 mA output signal
  • Supervision software for Windows: it enables to control ONOFF signals, analog signals coming from PID controller, realtime trend and historical trend

 

Experiments
The process unit enables to develop and analyze the following issues:

  • Mechanical filtration
  • Chemical filtration
  • Main parameters affecting filtration
  • Influence of feed flow rate on filtration
  • Optional automatic PID control
  • Optional plant supervision

 

Mains Power
220 – 240V 1Ph, 50Hz

Enquiry Form