Water Purification System

Order Code: 20213859.21.110

Category: General Lab Equipment IV

·  Water purification, reverse osomosis ·  Water flow rate: 24L/hr ·  Automatic flush cleanses to RO membranes helping to eliminate the build up of scale on the membrane, assuring maximum membrane ...



SPECIFICATION

·  Water purification, reverse osomosis
·  Water flow rate: 24L/hr
·  Automatic flush cleanses to RO membranes helping to eliminate the build up of scale on the membrane, assuring maximum membrane life
·  A serious of internal pressure gauges allow monitoring of membrane operating pressure and pressure drops across the pre-treatment filter
·  Controls provide for fully automatic operation
·  Monitor system operation with indicator lights on the control panel, alert to vital information, including membrane performance and reservoir level
·  With pump, pre-filter, MPS cartridge, extruded carbon filter and  two membranes
·  Inlet pressure: 2 to 6.8 bar at 1.5L/min
·  Plumbing connections: Feeding connections: 3/8''O.D. tubing, product water: 3/8''O.D. tubing, reject water: ¼'' O.D. tubing
·  Controls and indicators can be mounted up to 3m away from the system with the remote mounting control panel accessory
·  Recovery: 20 to 30%
·  Silt density index: <5%
·  Turbidity: <INTU
·  Total iron as Fe: <0.5ppm
·  PH: 6.5 to 7.5(optimum range) and 4 to 11(operating range)
·  Inlet water temperature: 10C to 350C
·  Dimension: 343mm x 429mm x 495mm
·  Power supply: 230V, 50/60Hz
Accessories
1.  30L resevoir Qty 1
2. Bench mounting stand for reservoir Qty 1
3. Remote control panel     Qty 1
4. Valve for hot and cold water in RO system   Qty 1
5. Replacement  prefilter, 5mm  Qty 1
6. Replacement cartridge for membrane protection system     Qty 1
7. Replacement carbon filter Qty 1
8. Replacement membrane  Qty 1

 

Enquiry Form