Water Purification System

Order Code: 22235922.58

Category: General Lab Equipment I

Description /Features: Maximum inorganic purity, With monitoring and provides reliable information on the organic quality in the two-second intervals, Economic working at very high product water safety thanks, Constant low bacterial content throug...



SPECIFICATION

  • Description /Features: Maximum inorganic purity, With monitoring and provides reliable information on the organic quality in the two-second intervals, Economic working at very high product water safety thanks, Constant low bacterial content through complete disinfection of all components in contact with water With LCD display.
  • Booster pump: without
  • Capacity: > 2 l/min
  • pH : Neutral 
  • Water source: of ion exchange from reverse osmosis system? Modules: ultra-filtration module (UV-modules)
  • In-organics: 18,2 MOhm-cm
  • Bacteria: < 0,1 KBE/ml 2)
  • Bacterial endotoxin: <0,001 EU/ml
  • Particles: Ultra-filtration
  • RNase/ DNase: Removed or no RNase/DNase
  • Fouling Index (max.): Must be with a minimum of One Additional 0.2 micron membrane pre filter 
  • Drain requirements: (gravity fall with air gap)
  • Service Deionization (SDI) - MO-cm: 1 MOhm-cm minimum resistivity at exhaustion.
  • Reverse Osmosis (RO) - µS/cm: Recommended <30 μS/cm
  • Free chlorine: 0,05 ppm max.
  • Total Organic Carbon (TOC): 50 ppb max.
  • Carbon dioxide: 30 ppm max.
  • Silica: 2 ppm max.
  • Particulates Filtration: below to 0.2 micron advisable
  • Feed water Pressure: Minimum 0.07 bar (1 psi) and Maximum 0.7 bar (10 psi), 
  • Flow rate (maximum requirement): 130 l/h
  • Accessories and Spare Parts: Pre filter and necessary cartridges should include additionally for one time replacement. 
  • Utility requirements: 220 V AC + 10, 50/60 Hz
  • Standard and Safety: Shall meet IEC-60601, Shall meet ISO13485(or equivalent BSI)
     

Enquiry Form