Vicat Softening Point And HDT Apparatus

Order Code: 24258298.2

Category: General Lab Equipment V

Determination of Vicat softening temperature (VST), heat deflection temperature (HDT) and creep behavior under flexural load for thermoplastics, hard rubber and fiber reinforce thermosets No. of measuring stations 3  Temper...



SPECIFICATION

  • Determination of Vicat softening temperature (VST), heat deflection temperature (HDT) and creep behavior under flexural load for thermoplastics, hard rubber and fiber reinforce thermosets

  • No. of measuring stations 3 

  • Temperature range +20 to +300 °C

  • Re-cooling PC-controlled via solenoid valve

  • Oil capacity, approx. 19.9

  • Height x width x depth 500 x 440 x 600 mm

  • Weight (without accessories), approx. 30 kg

  • Display accuracy at 250 °C ±0.5 °C

  • Spatial temperature gradient ±0.1 °C

  • Temperature measurement resolution 0.1 °C

  • Temperature sensor Oil-bath temperature is measured by 1 temperature sensor.

  • Heating rate 50, 120 or freely adjustable K/h

  • Displacement measurement with digital measuring transducers: resolution 0.001 mm

  • display accuracy ±0.01 mm

  • POWER CONNECTION: mains voltage 230/240 V, mains frequency 50/60 Hz& power rating 3460 W

  • PC INTERFACES REQUIRED: 1x for temperature channel (RS) & 1x for displacement channel (RS)

SPECIMEN DATA: 

  • VST specimen dimensions, max. 10 x 6.5 x 10 mm

  • HDT specimen dimensions, max. 13 x 15 x 130 mm

  • HDT spans 64, 100 and 101.6 mm

ACCESSORIES REQUIRED

  • Vicat flat-ended needle - 3No.

  • Weight set for Vicat - 10N and 50N as per ISO 306 and ASTM - 3No.

  • Die for HDT - 3No.

  • HDT calibration and centering tool for alignment of the HDT die - 1x required

  • Weight set for HDT

  1. HDT weight set, ISO 75-2 flatwise - For specimen size 4 x 10 mm (thickness x width ± 0.05 mm) and 80 mm length (± 2 mm), for flexural stresses of 1.8, 0.45 or 8 MPa. Adherence to specimen dimensions within ± 0.05 mm

  2. HDT weight set, ISO 75-2 edgewise - For specimen size 10 x 4 mm (thickness x width ± 0.05 mm) and 120 mm length (± 10 mm), for flexural stresses of 1.8, 0.45 or 8 MPa. Adherence to specimen dimensions within ± 0.05 mm.

  3. HDT weight set as per ASM D648 Methods A and B - For specimen size 3.175 x 12.7 mm (thickness x width), for flexural stresses of 1.82 / 0.455 MPa

  4. HDT weight set as per ASM D648 Methods A and B - For specimen size 6.35 x 12.7 mm (thickness x width), for flexural stresses of 1.82 / 0.455 MPa

  • Calibration set for HDT/Vicat measurement transducer. 

  • Universal set of weights for HDT/Vicat test standards - 1No. Required

  • Heat-transfer fluid for HDT/Vicat - 10 liters

  • Specimen cutters for Vicat for dimensioning Vicat specimens, with stop for specimen length of 10 mm

Enquiry Form