Universal Microcontroller Trainer

Order Code: 22236246.8

Category: General Lab Equipment II

Fuctional Characteristics Expansion of 8-bit I/O ports via an I2C Bus 12-bit D/A converters via a SPI Bus Reading/Writing of FLASH memory via an I2C Bus RTC management via an I2C Bus Serial RS232 and USB interface Management of LCD di...



SPECIFICATION

Fuctional Characteristics

  • Expansion of 8-bit I/O ports via an I2C Bus
  • 12-bit D/A converters via a SPI Bus
  • Reading/Writing of FLASH memory via an I2C Bus
  • RTC management via an I2C Bus
  • Serial RS232 and USB interface
  • Management of LCD displays
  • Management of GRAPHIC displays
  • Management of LEDs and keys
  • Management of 4 x 4 KEYS Matrix Keyboard
  • Management of external applications via 2 I/O ports
  • Base Board
  • I/O Expander PCF877A with selectable address, used as 8 inputs
  • I/O Expander PCF877A with selectable address, used as 8 Outputs
  • 7-segment common anode display connected to the output of the Expander PCF877A
  • 12-bit DACs with SPI interface and selectable address
  • Serial EEPROM 16K x 8bit 24LC128 memory with serial interface via an I2C bus
  • RS232 interface using MAX232C with RS-232 DB9 connector; interface for 5Vdc/3.3 Vdc
  • Clock and calendar with 240 x 8-bit RAM with serial interface via an I2C bus and 32.768 kHz external crystal oscillator
  • Alphanumeric 2 lines x 16 characters LCD; interface for 5Vdc/3.3 Vdc
  • Graphic 128 x 64 pixels LCD; interface for 5Vdc/3.3 Vdc 4 x 4 keys matrix keyboard
  • Aurduino Nano
  • Line of 8 keys for the bytes inlet port
  • Line of 8 LEDs for the bytes outlet port
  • Line of 4 keys with pull-up for the semibyte inle
  • Connector for 26-pin external applications interface
  • Connector for power supply of external RS-232 DB9 applications
  • Ansley 3×2 female connectors and bushings for the
  • connections with the sub- modules
  • ICSP programmer for microchip microcontrollers
  • ISP programmer for ATMEL microcontrollers
     

Power Supply Unit

  • Output 1: +1.3 Vdc ÷ +24 Vdc, 1A. Regulated voltage, electronically protected against short-circuits and overloads. Lateral knob for selecting the variable voltage.
  • Output 2: 24 Vac , 0.5A. Protected with fuse
  • Output 3: +5 Vdc ,2 A
  • Output 4: +12 Vdc, 2 A. Regulated voltage,electronically protected against short-circuits and overloads.
  • Output 5: -12 Vdc ,1A. Regulated voltage,electronically protected against short-circuits and overloads.
  • Power supply: 230 Vac 50 Hz single-phase , 130 VA

Enquiry Form