Technical specifications 

• 2 MHz sampling rate with 12-bit resolution 
• 8 selectable low-pass filter cut frequencies 
• Advanced signal processing (Transit time, Wave shape, FFT, SonReb) 
• Selectable pulse rate 1, 2, 5 per second 
• Transmitter pulse 2500 V 
• Transit time up to 16 ms with 0.1 µs resolution 
• Slot for memory card to save data 
• RS 232 and USB port for real time downloading to PC 
• Battery powered by internal rechargeable battery pack (7.2 Ah) up to 9 working hours before recharging
• Dimensions: 264 x 233 x 83 mm (instrument only); 500 x 400 x 140 mm (carrying case)
• Weight: 2.6 kg (instrument only); 5 kg (complete outfit) (approx.)

Ordering information

• PULSONIC Ultrasonic pulse analyzer, standard outfit, comprising two 50 kHz testing heads (one of the two probes is fitted with a sampling button to select reading to be recorded), 2 m cables, calibration rod, bottle of contact paste and carrying case.

Accessories

• Testing heads: the standard 50 kHz transmitted and receiver heads are supplied with the tester. Different heads are available with different nominal concrete working frequencies of 25 and 150 kHz, which is the usual range for normal concrete. The higher one (150 kHz) is recommended for homogeneous concrete, the lower (25 kHz) for heterogeneous concrete.

Spare parts 

• Piezoelectric head for ultrasonic tester. Nominal frequency 50 kHz. Can be used either as receiver or transmitter. Fitted with BNC connector for coaxial cable.
• Piezoelectric head with sampling button for ultrasonic tester. Nominal frequency 50 kHz. Fitted with BNC connector for coaxial cable.
• Spare 2 m cable for testing probe connection.
• Coupling agent (contact paste),250cc bottle.