10209J spectrum analyzers have a frequency range of 9 kHz to 3.6 GHz. With their light weight, small size, and friendly user interface, the 10209J offer a bright easy to read display, powerful and reliable automatic measurements, and plenty of powerful features. Applications include broadcast monitoring/evaluation, site surveying, EMI pre-compliance, research and development, education, production, and maintenance.
FEATURES
- Frequency Range from 9kHz up to 3.6 Ghz
- -160 dBm Displayed Average Noise Level
- Phase Noise -82dBc/Hz @1Gz and offset at 10 Khz
- Total Amplitude Accuracy <1.5dB
- 10Hz Minimum Resolution Bandwidth (RBW)
- EMI Pre-compliance Test Kit (optional)
- 3.6 GHz Tracking Generator
- 10.4 inches display
SPECIFICATIONS
Frequency
- Range : 9 kHz ~ 3.6 GHz
- Resolution : 1Hz
- Range : 0 Hz, 100Hz to maximum frequency of device
- Accuracy : ± 0 span/ (swept points -1)
Internal Reference
Reference Frequency : 10.000000MHz
Frequency Counter
Resolution : 1 Hz%uFF0C10 Hz%uFF0C100 Hz%uFF0C1 kHz
Accuracy : ±%uFF08marker freq × freq reference uncertainty counter resolution%uFF09
Bandwidth
Resolution Bandwidth (-3 dB) : 10Hz to 500kHz (in 1 to 10 sequence) , 1MHz, 3MHz
Resolution Filter Shape Facto : <5 : 1 nominal (Digital implement, similar to Gauss Pattern)
Accuracy : <5% nominal
Video Bandwidth (-3 dB): 10Hzto 3MHz
Amplitude and Electric Level
Amplitude Measurement Range : DANL to 20 dBm, close the preamplifier
Reference Electric Level : -80 dBm to 30 dBm, 0.1dBm steps
Preamplifier : 20 dB, nominal, 9 kHz-1.5 GHz
InputAttenuator Range : 0-40 dB, 3 dB steps , 10-50Db, 1Db steps
Max Input DC Voltage : 50 VDC
Max Continuous Power : 30dBm, average continuous power
Displayed Average Noise Level (DANL)
Preamp off : Input attenuation 0dB 1Hz resolution bandwidth, RBW = 10Hz Normalization to 1 Hz
1MHz 10MHz - 130 dBm (typical)
10MHz- 1GHz - 130 dBm (typical)
1GHz 3.6GHz - 148 dBm (typical)
Preamp on :
1MHz - 10 MHz -150dBm (typical)
10MHz - 1 GHz -150dBm (typical)
1GHz - 3.6 GHz -148dBm (typical)
Phase Noise
Phase Noise :
<-82 dBc/ Hz @10 kHz offset
<-100 dBc/ Hz @100 kHz offset
<-110 dBc/ Hz @10 MHZ offset
Level Display Range
Log Scale Coordinate : 1dB -255dB
Linear Scale Coordinate : 0 to reference level
Level Unit : dBm, dBuW, dBpW, dBmV, dBuV, W,V
Points : 201-1001
Number of Traces:5
Detectors : Positive-peak, negative-peak, sample, normal, RMS
Trace Functions : Clearwrite, Max Hold, Min Hold, View, Blank, Average
Frequency Response
Preamp off : ±0.8 dB; ±0.4 db. typical
Preamp on : ±0.9 dB; ±0.5 db. typical
20°C -30°C, 30%-70% relative humidity, 10 dB input attenuation, reference 50 MHZ
Accuracy
Input Attenuation Switching Uncertainty : 20°C - 30°C, fc=50 MHZ, Preamplifier Off, 20dB RF attenuation, input signal 0-40 dB ±0.5 dB
Absolute Amplitude Uncertainty : 20°C-30t, fc=50 MHZ Span = 200kHz, RBW=1 kHz, VBW=1 kHz, Peak detector, 10 dB RF attenuation, Preamplifier Off ±0.4 dB, input signal= -20dBm Preamplifier On ±0.5 dB, input signal= - 40dBm
VSWR : input 10 dB RF attenuation, 1MHz- 3.6GHz, <1.5, nominal
Sweep Time and Triggering
Span Range : 100HzSPAN3GHz 10ms to 3000s, None-zero Span 10ms to 3000s zero sweep width 1 ms to 3000s, Zero Span 10ms to 3000s
Mode : Continue, single
Trigger : Free run, video, external
Tracking generator
Output Frequency Range : 100 kHz-3.6 GHz (tracking generator) 35MHz- 3.6GHz (Signal generator)
Output Power Level Range : -30 dBm-0 dBm
Output Power Level Resolution : 1dB
Output Flatness : ±3 dB
Maximum Safe Reverse Level : Average total power: 30 dBm, DC : ±50 VDC
General Technical Specification
Display : TFT LCD, 10.4 inches, 800 x 600 pixels
Front Panel RF Input Connector : 50W, N-type female
Front Panel Track Generator Output : 50W, N-type female
Communication Port : USB HOST, USB DEVICE, LAN, earphone port, REF and VGA
Power : 100V-240V 50/60Hz
Accessories : Power Chord, CD-ROM, User Manual, N-SMA Adapter - 2nos
ACCESSORIES
- Power Cord : 1 No.
- USB Cable : 1 No
- N Type SMA Cable : 2 No.
KEY MEASUREMENT PARAMETERS
1. 10 Hz Minimum Resolution Bandwidth
Digital IF technology offers a minimum bandwidth of 10Hz, allowing excellent signal resolution when separation of closely spaced signals is required.
2. Phase noise: <-80 dBc/Hz @1 GHz @ 30 KHz offset
Excellent phase noise performance - <-80dBc/Hz @30KHz enables users to evaluate most synthesizers and signal generators.
3. EMI filter and peak detector kit
Akademika offers an EMI filter and peak detector kit to help evaluating EMI levels for pre-compliance testing.
4. Measure -130dB small signal at 10Hz RBW
Offers a DANL (displayed average noise level) down to 130 dBm, which is able to measure smaller signals.
Experiment List
01. Measured the Variation of Received Power Vs distance
91-9829132777