Introduction
Hybrid Renewable Energy Systems are becoming popular as stand-alone power systems for providing electricity in remote & urban areas due to advances in renewable energy technologies and subsequent rise in prices of petroleum products. A hybrid energy system usually consists of two or more renewable energy sources used together to provide increased system efficiency as well as greater balance in energy supply.Solar and Wind hybrid power plant is an integrated hybrid energy solution capable of harnessing both the sunlight onsite and wind energy available at low altitudes in urban and rural environment. It is designed Solar & Wind Hybrid Power Generation Training System to explain fundamentals of power generation and storage of Solar and Wind energy.This system includes controller-based digital measuring instruments for accurate results and protection devices for safety. It also includes an inbuilt Inverter which can be operated with both mains and through batteries. Users can easily understand how to configure Hybrid Solar & Wind system to get the maximum electrical energy for domestic and industrial use.

Features

• Platform to provide complete understanding of Solar and wind Power Generation and itsapplications
• Specially designed patch cords for extra safety.
• Built-in Off-Grid Inverter
• Equipped with adequate Protections wherever requires
• Highly accurate microcontroller-based measuring instruments.
• Equipped with multifunction meter to analyze output parameters.
• Designed considering all safety measures.
• System is flexible to operate on mains as well as inverter mode

Technical Specifications
Power Supplies:
Electrical control panel Operated on Mains power 230V, 50Hz +10%
Digital Meters:

To measure solar current voltage:
DC Voltmeter: 0-300V, DC Ammeter: 0-20A
To measure battery current voltage:
DC Voltmeter: 0-300V, DC Ammeter: 0-20A
Multi Function Meter (Voltage-10-230V, Current-100mA-5A, Watt-10-1200W, Energy
meter, Display Resolution- 0.001kWh, Frequency-50Hz)
Control panel with inverter:

• Capacity: 500VA
• Input Voltage: 190~260V AC
• Output Voltage on Mains mode: same as input
• Output Voltage on UPS mode: 210~245V
• Output Frequency on UPS mode: 50Hz ±0.1Hz
• Output waveform on Mains mode: same as input
• Output waveform on UPS mode: Modified Sine wave
• Battery Charging Current: 12A
• Efficiency at full load : >80% UPS Overload/UPS Short circuit: Yes

Battery

• Solar Battery Capacity : 12V/40Ah
• Type : C10
• Qty: 2 Nos.

Power and Charge Controller Unit (Solar):

• Solar PV Module : 24–50V
• Current : 20A
• Battery voltage : 24V
• Technology : PWM based

Power and Charge Controller Unit (Wind):

• Solar PV Module : 24–50V
• Current : 20A
• Battery voltage : 12V

Solar Power Stand (300W) with Stand
Vmp: 35V
Imp : 7.14A
Wind Turbine

• Wattage: 100W
• Output: 24V DC
• Blades: 3Nos.
• Wind blower
• Wattage 1hp
• Axial fan blower with 3 phase induction motor controlled by 1hp ac VFD drive

Leaning Contents

• Measurement and Analysis of Different parameters of Solar PV Moduleopen circuit and short circuit,parameter measurement with series and parallel PV modules , I-V characteristic of PV module.
• Study of Wind Power and Wind Energy power generation.
• Study of wind turbine power and wind speed curves

Accessories Included

• Battery Bank 2Nos.
• Wind Turbine
• Fan Blower
• Solar Cell 2Nos.
• Patch Cords
• Filament Lamp 6Nos.
• Manual