Rainfall Simulator

Order Code: 23246926.31

Category: General Lab Equipment III

Permeable catchment area fed with ‘rain’ from overhead spray nozzles and/or by groundwater flow from ends of tank, Four groups of switchable spray nozzles supply the catchment area Piezometer tappings to measure water table profile, ...



SPECIFICATION

  • Permeable catchment area fed with ‘rain’ from overhead spray nozzles and/or by groundwater flow from ends of tank, Four groups of switchable spray nozzles supply the catchment area
  • Piezometer tappings to measure water table profile, Can measure ‘drawdown’ due to single or two interacting wells, Adjustable inclination of catchment area angle, Includes electronic flow meter to measure flow to the catchment area, Run-off end well flows measured by electronic flow meter, Self- contained – requires only an electrical supply, Comes with VDAS® Onboard featuring data acquisition via USB
  • VDAS® data acquisition works with software to capture flow rates, sedimentation rate (with the optional FCA1 pressure readings may also be captured).
  • Net dimensions and weights:2400 x 1080 x 2200 mm and 450 kg Packed
  • dimensions and weights: 5.77 m3 and 600 kg,Main parts
  • Catchment area: Stainless steel tank 2 m x 1 m Normal depth of permeable medium 180 mm,
  • Spray nozzles: Eight, in four banks of two, each bank individually selectable,
  • Reservoir tank: Capacity approx 273 litres,
  • Recommended medium: Approx 800kg of washed sand graded 0.5 mm to 1.5 mm Operating environment:
  • Laboratory Storage temperature range:25°C to +55°C (when packed for transport) Operating temperature range: +5°C to +40°C Operating relative humidity range:
  • 80% at temperatures < 31°C decreasing linearly to 50% at 40°C Electrical supply (specify on order): Single- phase 220 - 230 VAC, 50 Hz, 3A or Single-phase 110 120 VAC, 60 Hz, 6A Floor
  • space needed: Approximately 3 m x 2 m. (only TecQuipment Brand)"

Enquiry Form