Portable Scope-meter

Order Code: 21224902.2.2

Category: General Lab Equipment II

Purpose Hand held instrument that combines functions of DMM and oscilloscope used to measures and graphically display waveforms of AC and DC voltage, signal timing and all related electrical quantities during troubleshooting and repair of electron...



SPECIFICATION

Purpose

Hand held instrument that combines functions of DMM and oscilloscope used to measures and graphically display waveforms of AC and DC voltage, signal timing and all related electrical quantities during troubleshooting and repair of electronic and electrical devices at field or workshop.

Features :

  • Full color LCD with fast update rate
  • Dual-input 100 MHz digital oscilloscope
  • Capture Record and Share Waveforms
  • true-RMS digital multimeters
  • Automatic measurements
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • Longer battery operation
  • Optically-isolated interface for PC connection via USB port
  • Rugged, compact case

Oscilloscope mode

Bandwidth : 100MHz

Number of inputs : Two channels of 100MHz

Real-time sample rate : 1.25 GS/s

Time base range : G5 ns - 2 min/div

Input sensitivity : 2 mV-100 V/div

Trigger types : Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle ,

Trigger source : Any scope input channel, or external via DMM

Glitch capture : <8 ns

DMM specification

Inputs : Fully isolated from scope inputs and from scope ground

Maximum resolution : 5000 counts

Measurements : VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F

 

Accessories : Alligator clips, Shielded Test leads, Hook clips, oscilloscope probes and complete standard accessories

Power requirement : 

  • shall be powered by standard, commercially available batteries, or by rechargeable batteries
  • Line voltage adapter/ rechargeable batteries Charger (220V, 50Hz) shall be delivered
  • IEC World plug type F or EEC3/7 (Schuko)

Certification : 

  • Compliant to IEC 61204-7 standard, safety requirements for low voltage DC power supplies and IEC 61326-1:2012 compliant for EMC.
  • CE or equivalent Traceable certificate shall be attached

Environmental conditions : Operating temp.: 0°C to +50°C, humidity: 90% RH, non-condensing and altitude up to 3000m

Warranty : 2 years starting from the date of acceptance testing approval

Certification

  • Calibration valid for 2 years, certificate attached
  • EMC meets or exceeds IEC 61326-1:2005/EN61326-1:2013
  • IP64 (dust proof and water resistant) according to IEC 60529:1989-2013

Technical Documentation : User, installation and maintenance manuals is to be supplied in English language

Enquiry Form