Learning Objectives

Setup and design of a PLC via TIA Portal

Commissioning an automation system

Programming acc. to international standard IEC1131-3

Connecting and commissioning field bus systems

TP 70.3-6

Training Package:

Automation Technology S7-1200 Touch

PLC training system S7-1200/Touch

Function groups:

CPU 1215C with the integrated features:

- PROFINET interface

- 14 digital inputs, 4 of which for use as rapid counter inputs 100 kHz

- 10 digital outputs

- 2 analog inputs 0..10V DC, 2 analog outputs 0..20 mA

- controlled positioning, analog and digital

- PID controller

Touch Panel KTP700 PN

7" colour graphic display with touch function

- additional function keys for free programming

- PROFINET interface

5-port Profinet switch for Profinet network configuration

mounted on:

Automation Board

Experimenting Board in A4 format

Technical data:

Integrated power supply 24V DC/6.5A

- 14 digital inputs, 10 digital outputs 24V DC

- 24 safety sockets, 4mm, for digital in- and outputs

- 14 simulation push/lock-in switches for digital inputs

2 analog inputs, 1 analog output 0...10V DC on 4mm safety sockets

Simulation field for analog processing with 4mm safety sockets

System interface SUB-D 25-pin

AS-i terminals, as 4mm safety sockets and push-in terminals

- HMI Profinet connection at RJ45 socket

- Tophat rail and line-up terminals for mounting and connection of AS-i and Profibus components

Digital outputs protected against short-circuiting

- Slot (covered), prepared for integration of KTP700

- Connecting lines for S7-1215C

- System interface for connecting the Automation Board Expansion 

Design:

Board with photorealistic, multi-colour front panel design.

Coloured lines according to colour code.

A special coating makes the panel surface scratch-proof.

Didactic standard labelling with operating instructions

and connection possibilities facilitate commissioning

by the user.

Within delivery scope:

- PROFINET system cable, length: 6 m

- 4 MB Micro Memory Card

- Programming software TIA Portal Basic, single licence

System requirements:

Windows 7 (64 bits) or later

For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research institutions and non-commercial training departments only

TechnoCard

Automation Board S7-1200 Touch

optional:

0MONT

Assembly S7-1200

Assembly of additional (also customer-provided) controls and modules on the Automation Board, incl. function test

optional:

Communication module CM1243-5 Profibus

for use as a Profibus-DP master in a Simatic S7-1200 control

optional:

Communication module CM1243-2 AS-i master

for use as an AS-i master in a Simatic S7-1200 control

optional:

Data decoupling module DCM1271, for AS-i master

required for operation of the AS-i master in a Simatic S7-1200 control

optional:

Digital I/O module SM1223

required for operation of the second system interface Sub-D 25-pin

incl. set of connection cables for connection to the 71200

Set of ring binders

consisting of:

-  ring binder for printed media

with dividers for the following sections:

  - Trainer section

  - Practical experiments

  - Expert publications

  - Transparencies

  - Projects

-  ring binder for digital media

 Student manual, incl. CD-ROM

"S7-1200 Basics"

Content:

1. General information

1.1. S7-1200 family

1.2. Hardware

1.3. Software used

1.4. Requirements

1.5. STEP7 project view overview

2. Hardware configuration basics

2.1. Determining hardware components

2.2. Creating projects

2.3. Adding a PLC

2.4. Configuring the PLC

2.5. Assigning address ranges

2.6. Review questions

3. Commissioning basics

3.1. Loading the hardware configuration

3.2. Online/offline mode

3.3. Input tags in online mode

3.4. Output tags in online mode

3.5. Blocks in online mode

3.6. Review questions

4. Programming basics

4.1. Block types

4.2. FC function or FB function block

4.3. Task card instructions

4.4. Single or multiple instance

4.5. Review questions

5. Transfer system sequence – 2 positions

5.1. Task

5.2. Solution

5.3. Check

6. Transfer system sequence – 3 positions

6.1. Task

6.2. Solution

6.3. Test and analysis

6.4. Correction

6.5. Testing and analysing the correction

6.6. Review questions

7. PROFIBUS connections

7.1. Requirements

7.2. Set-up

7.3. Hardware configuration

8. PROFINET connections

8.1. Requirements

8.2. Set-up

8.3. Hardware configuration

8.4. Commissioning

9. AS interface

9.1. Requirements

9.2. Set-up

9.3. Hardware configuration

9.4. Commissioning

10. Handling station project

10.1. Set-up

10.2. Sequence description

10.3. Sequence diagram

10.4. Implementation

10.5. Task sequence diagram in FBD

10.6. Solution sequence diagram in FBD

Instructor's manual, incl. CD-ROM

"S7-1200 Basics"

Structure of the manual and contents same as in
student edition, however with solutions

optional:

Patch cable set: 2 x 0.25m; 2 x 0.5 m