Technical Specifications:
Simulated Blocks:
• Dead Time (Transportation Lag)
• Integrator
• Time Constant
• Error Detector and Gain
PID Controller Configuration (Available as P, PI, PD, or PID):
• Proportional Band: 5% to 50% (Gain: 2-20)
• Integral Time: 10ms to 100ms
• Derivative Time: 2ms to 200ms
Built-in Signal Sources:
• Set Value: -1V to +1V

• Square Wave: 1V peak-to-peak (min) at 40Hz
• Triangular Wave: 1V peak-to-peak (min) at 40Hz
Built-in 3½ Digit Digital Volt Meter (DVM) for DC Measurements
Interconnections:
• All interconnections are made using 2mm banana patch cords.
• Test points are provided to analyze signals at various points.
• All ICs are mounted on IC sockets.
• Bare Board Tested Glass Epoxy SMOBC PCB is used.
• In-built Power Supply: +5V/1.5A, ±12V/250mA with power-on indication.
• Attractive Wooden Enclosures made of lightweight Australian pine wood.
• A set of 2mm patch cords for interconnections.
• User’s Manual with sample experiments.

List of Experiments:
• Open-loop response of various process configurations (e.g., combinations of time constants, delays).
• Study of the closed-loop response for the above-mentioned configurations.
• P, PI, PD, and PID design and performance evaluation in each case.
Warranty & Services:
• Warranty: 2 years with service and spare parts.
• Installation, Testing, and Commissioning: Performed by expert engineers.
• Training: A five-day-long training session to be conducted at the delivery point, covering detailed step-by-step processes for at least five participants.
• A comprehensive experiment manual will be provided, outlining each experiment's procedure in detail.