Passive Oscilloscope probe 20,40,60 MHZ

Order Code: 19204149.37

Category: General Lab Equipment III

Fitted onto the probe tip, it allows the probe to be attached to a BNC jack, providing both signal and ground connections Fitted around probe tip ground sleeve to provide a short ground connection to the circuit under test IC tip insulator ...



SPECIFICATION

  • Fitted onto the probe tip, it allows the probe to be attached to a BNC jack, providing both signal and ground connections
  • Fitted around probe tip ground sleeve to provide a short ground connection to the circuit under test IC tip insulator 
  • Fitted over the probe tip, provides insulation and is intended to go between the pins of an IC, allowing the probe to contact one pin while insulating it from adjacent pins Tip insulator 
  • Fitted over the probe tip, insulates the probe tip except for the very end.
  • Used for probing on circuit boards with closely spaced components to prevent short circuits Channel Slipped into slots on the probe and the probe connector box.
  • Color should identifier rings match the trace color of the channel the probe is connected to Adjustment Used to adjust the low frequency and high frequency compensation trimmers tool Replacement Spare tip for the probe in case the original tip is damaged. 
  • Warranty:12 months under Suppliers warranty certificate
  • The supplier to attach evidence of the equipment(s) under supply
     

Enquiry Form