Oscilloscope 200MHZ 4 Chanel

Order Code: 19204149.40

Category: General Lab Equipment III

Vertical Channels: 4Ch+EXT Bandwidth: DC~200MHz(-3dB) Rise Time: 1nS Bandwidth Limit: 20M/100M/200MHz Vertical Resolution: 8 bits Resolution(1MΩ): 2mV~5V/div Resolution(50/75Ω): 2mV~1V/div Waveform Signal:  Proc...



SPECIFICATION

Vertical

  • Channels: 4Ch+EXT
  • Bandwidth: DC~200MHz(-3dB)
  • Rise Time: 1nS
  • Bandwidth Limit: 20M/100M/200MHz
  • Vertical Resolution: 8 bits
  • Resolution(1MΩ): 2mV~5V/div
  • Resolution(50/75Ω): 2mV~1V/div
  • Waveform Signal: 
  • Process: 
    1. Add, Subtract, Multiply, and Divide waveforms, FFT, FFTrms ; FFT Spectral magnitude.
    2. Set FFT vertical scale toLinear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning or Blackman-Harris.
  • Input Coupling: AC, DC, GND
  • Input Impedance: 1MΩ// 15pF approx.
  • DC Gain Accuracy: (3% X |Readout| + 0.1div + 1mV)
  • Polarity: Normal , Invert, Maximum Input
  • Voltage(1MΩ): 300V (DC+AC Peak), CAT I
  • Maximum Input: 5 Vrms , CAT I
  • Voltage(50/75Ω)
  • Offset Position
  • Range:  
    1. 2mV/div ~ 100mV/div : 0.5V ;
    2. 200mV/div ~ 5V/div : 25V
  • Trigger
  • Source: 4CH model: CH1 , CH2 , CH3 , CH4 , Line , EXT 
  • Auto (Supports Roll Mode for 100 ms/div and slower), Normal, Single
  • Trigger Mode: Edge, Pulse Width, Video, Runt, Rise & Fall, Alternate, Event-Delay(1~65,535 events), Time-Delay(10ns~10s), I C, SPI,
  • Trigger Type:  UART(optional) 10ns ~ 10s Trigger Holdoff
  • Range: AC, DC, LF rej. , Hfrej. , Noise rej.
  • Coupling: DC~30MHz Approx. 1div or 10mV; 50MHz~150MHz Approx.
  • Sensitivity: 1.5div or 15mV; 150MHz~350MHz Approx. 2div or 20mV;
  • 350MHz~500MHz Approx. 2.5div or 25mV

 

Ext trigger:

  • Range: 15V
    1. Sensitivity: DC ~ 150MHz Approx. 100MV
    2. 150MHz ~ 250MHz Approx. 150mV;250MHz ~ 350MHz Approx.
    3. 150mV;350MHz~500MHz Approx. 200MV 
  • Input Impedance:  1MΩ 3%, ~16pF
  • Horizontal:
  • Range: 1ns/div ~ 100s/div (1-2-5 increments; GDS-3502/3504 1-2.5-5
  • increments)ROLL : 100ms/div ~ 100s/div
  • Pre-trigger:  10 div maximum
  • Post-trigger : 1,000 div max
  • Accuracy: 20 ppm over any≥ 1 mS time interval
  • X-y mode: 
  • X-Axis Input/Y-Axis: Channel 1; Channel 3/Channel 2; Channel 4
  • Phase Shift: 3? at 100kHz
  • Acquisition:
  • Rate: 5GSa/s
  • ET Sample Rate: 100GSa/s  max.
  • Record Length: 25k points
  • Acquisition Mode: 
    1. Normal, Average, Peak detect, High resolution, Single
  • Average: 2 ~ 256 waveforms ; Peak detect: 2ns
  • Power: 
    1. Power Quality: VRMS, VCrest factor, Frequency, IRMS, ICrest factor, True power
  • Measurements: 
    1. Measurements: Apparent power, Reactive power, Power factor, Phase angle.
    2. Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
  • Ripple: Vripple ,Iripple
  • Measurements:  First peak, second peak  In-rush current

Enquiry Form