Order Code: 24257288.1
Category: General Lab Equipment V
Laboratory tables with cabinets at the bottom and dividers at tabletops. Including built-in sink and faucet. All parts and elements is most chemicals resistant, acid and alkali resistant, scratch, impact and cutting resistant. C...
Laboratory tables with cabinets at the bottom and dividers at tabletops. Including built-in sink and faucet.
All parts and elements is most chemicals resistant, acid and alkali resistant, scratch, impact and cutting resistant.
C-frame or square tube pipe frame tables, customised size.
Dimensions : L = 1800 mm, W/D = 1500 mm , H = 850-1100 mm
Material Powder coated rolled steel, epoxy resin/HPL/ceramic, tempered glass, coated stainless steel
Colour Light Grey
Metal Structure
Material : Steel
Steel bearing structure : Elements wall thickness at least 2 mm
Surface treatment for steel elements : All steel elements cleaned with acid and coated with electrostatic, corrosion resistant and oven dried spray paint (thermally painted)
Worktop
Thickness : 16-25 mm thick lab grade worktop
Materials (The vendor to propose all options for selection)
Option 1: Epoxy Resin (light grey) ("DURCON", "EPOXYN" or closest analogue) countertops
Option 2: Ceramic
Worktop surface level from finished floor : 850-1100 mm
Cabinet
Material : at least 1.2mm thick cold rolled steel
Attachment method : not standalone, secured to frame
Material of metal handles and hinges : stainless steel
Metal hinges opening degree : 90-110 degrees
Reagent rack
Shape : Double-Sided Reagent Rack
Support Structure : Epoxy-Coated Square Pipe Vertical Supports
Safety Feature : Guard Rails on Both Sides
Shelf Material : Tempered Glass (minimum 12mm thick) or ceramic, or epoxy resin, or steel with chemical resistant coating
Configuration : One Rack with Two Shelves per Table Module
Table surface dividers : 8-12 mm thick tempered glass
Sink
Sink Material
Option 1: Stainless steel for worktop integrated into table surface
Option 2: High grade epoxy resin, built in the table surface for epoxy resin worktop
Option 3: Ceramic for ceramic worktop
Quantity : One Sink Per Table
Orientation : Sink Unit Positioned Perpendicularly to the Working Surface
Faucet
Faucet Material
Option 1: Solid Brass with High Gloss Epoxy Powder Coating for epoxy resin worktop
Option 2: Chromed steel
Option 3: Laboratory dedicated copper main body material with epoxy resin coating
Durability- UV Fading and Heat Resistant, Minimum 100,000 Life Cycles
Electric Connections:
Power receptacles : Each table module shall be equipped with 3 x 230V (from each side: total x 6 per table) European type (Schuko) power receptacles with grounding contact installed on the electric panel.
Location : The electric panel shall be installed on vertical supports, under lower rack.
Low voltage connections : The electric panel shall be equipped with 3 (from each side of the panel, in total 6 per table) adjustable DC voltage (0-24V) contacts and 3 (in total 6) 4 mm diameter plugs.
These shall be centrally controlled from teachers' station only
Power measurement device : Built-in voltmeters near each 0-24 outlets
Connection principle : The electric connection between tables located aside shall be cascading
Ingress protection : Receptacles - IP44
Other Requirements
There will be 230V and 0-24V cable installed at the table designed location, connections within the table electric panel will responsibility of the contractor
Extra Parts - minimum of 3 packages
hinges, handles, screws etc. for easy substitution if lost or damaged during transportation
Materials Safety Data Sheet
For all components in English language mandatory, other languages optional