Installation Tester

Order Code: 22235450.18

Category: General Lab Equipment II

Features:    A solid, reliable, basic installation tester  Tests voltage and frequency  Checks wiring polarity to detect broken N wires  Measures insulation resistance and loop and line resistance  Measu...



SPECIFICATION

Features:

 

  •  A solid, reliable, basic installation tester
  •  Tests voltage and frequency
  •  Checks wiring polarity to detect broken N wires
  •  Measures insulation resistance and loop and line resistance
  •  Measures motor windings with continuity test
  •  Calculates prospective earth fault current (PEFC/IK) and prospective short-circuit current (PSC/IK)

Specifications:

AC voltage measurement
Range 500 V
Resolution 0.1 V
Accuracy 45 Hz-66 Hz 0.8% +3
Input impedance 360 ΚΩ
Overload protection 660 V rms
Continuity testing (RLO)
Range (autoranging) 20 Ω / 200 Ω / 2000 Ω
Resolution 0.01 Ω / 0.1 Ω / 1 Ω
Open Circuit Voltage >4 V
Insulation resistance measurement (RISO)
Accuracy of tTest voltage (at rated test current) +10%, -0%
Test voltage 100 V
250 V
500 V
1000 V
Insulation resistance range 20 ΜΩ / 50 ΜΩ
20 ΜΩ / 100 ΜΩ
20 ΜΩ / 200 ΜΩ
20 ΜΩ / 200 ΜΩ / 500 ΜΩ
20 ΜΩ / 200 ΜΩ / 1000 ΜΩ
Resolution 0.01 ΜΩ / 0.1 ΜΩ
0.01 ΜΩ / 0.1 ΜΩ
0.01 ΜΩ / 0.1 ΜΩ
0.01 ΜΩ / 0.1 ΜΩ / 1 ΜΩ
0.01 ΜΩ / 0.1 ΜΩ / 1 ΜΩ
Test current 1 mA @ 50 kn
1 mA @ 100 kQ
1 mA @ 250 kQ
1 mA @ 500 kQ
1 mA @ 1 MQ
Loop and line impedance (ZI)
Range 10/0.001/High current m mode
Resolution 0.01 Ω / 0.1 Ω / 1 Ω
Prospective earth fault current, PSC test
Range 1000 A/10 kA (50 KA)
Resolution 1A/0.1 KA
Computation Prospective earth fault current (PEFC) or Prospective short circuit cur- rent (PSC) determined by dividing measured mains voltage by meas- ured loop (L-PE) resistance or line (L-N) resistance, respectively
RCD testing, RCD types tested
RCD Type A4, AC¹, G2, S3
Notes 'Responds to AC
2General, no delay
3Time delay
*Responds to pulsed signal
5Responds to smooth DC signal
Tripping speed test (AT)
Current settings' 10-30-100-300-500-1000 mA - VAR
10-30-100 mA
Multiplier X2, X 1
X 5
Measurement range RCD Type G 310 ms
50 ms
RCD Type S 510 ms
160 ms
Notes 11000 mA type AC only
700 mA maximum type A in VAR mode VAR mode not available for type B.
RCD/FI-Tripping Current Measurement/Ramp Test (IAN)
Current range 30% to 110% of RCD rated current¹
Step size 10% of IAN²
Dwell time Type G 300 ms/step
Type S 500 ms/step
Measurement Accuracy ±5
Specified trip current ranges (EN 61008-1) 50% to 100% for Type AC
35% to 140% for Type A (>10 mA)
35% to 200% for Type A (≤10 mA)
50% to 200% for Type B
25% for Type B
Notes 130% to 150% for Type A IAN > 10 mA
30% to 210% for Type A IAN = 10 mA
20% to 210% for Type B

 

Enquiry Form