Induction Motor Winding Trainer

Order Code: 23246885.1

Category: General Lab Equipment II

Feature: Use 4mm safety socket terminal The clear printed winding set code and colorful wire top allow user to do winding and operation easily The power input with the motor circuit breaker prevents the danger of wrong winding and improper ...



SPECIFICATION

Feature:

  • Use 4mm safety socket terminal
  • The clear printed winding set code and colorful wire top allow user to do winding and operation easily
  • The power input with the motor circuit breaker prevents the danger of wrong winding and improper operation
  • Easily links to break control. It can measure and draw the characteristics curve of each winding motor through PC.
  • Plug-in module helps teachers to complete the experiments easily quickly.

Specification:

  • AC Voltmeter : 0 to 600 (minimum)
  • AC Ammeter : 0 to 6 Amp (minimum)


Induction Motor:

  1. Rated voltage: 3 Phase (220V/60Hz)
  2. Rated Current: 1.39 A (minimum)
  3. Rated Speed: 1660 rpm (minimum)
  4. Output Power: 0.29Kw (Minimum) ; 0.3Kw Maximum
  • The motor main body can be connected to the magnetic-powder-brake unit by direct couple.
  • With single-phase starting resistor, starting capacitor and rounding capacitor.
  • Single-Phase induction motor is started by emulated centrifugal switch.
  • The induction motor winds Max. to 12 pole.

List of Experiment:

  • Learning the winding of Single phase 2 pole inductions motor.
  • Learning the winding of Single phase 4 pole inductions motor.
  • Learning the winding of Single phase 6 pole inductions motor.
  • Learning the winding of Single phase 12 pole inductions motor.
  • Learning the winding of Three phase 2 pole inductions motor.
  • Learning the winding of Three phase 4 pole inductions motor.
  • Learning the winding of Three phase 6 pole inductions motor.
  • Learning the winding of Three phase 12 pole inductions motor.
  • Three Phase induction motor random winding.
  • Three Phase induction motor fixed torque, fixed power rounding.

Accessories:

  • 4mm safety Jack : 1 set
  • User Manual: 1 Nos
  • With Standard Accessories.
  1.  Installation, Testing, Commissioning, and Training should be performed by qualified and experienced engineers including required raw materials at bidder's own cost.
  2.  Warranty: 01(One) Year supported by performance security
  3.  Manufacturers Authorization Letter must be submitted.
  4.  ISO or CE certificate must be submitted.
  5.  Catalog / Brochure should be submitted.
     

Enquiry Form