The technical specification of item MEE 74 should read as follows:
Training Equipment in Industrial Hydraulics: Universal Testing Frame constructed of a twinned steel channel frame fastened with high tensile fixings. This creates an overall structure size of 
4.61m long, 2.53m high and 1.2m wide and a working space of 4.0m long x 1.6m high. The 0.60m spacing between the verticals allows for wide test specimens to be tested. The base feet distribute the self-weight of about 1 tonne to four anti vibration levelling feet. The top channel members are used to carry a single acting hydraulic ram Carriage. Accessories to be included: load supports, reaction plates, clamps, dial gauge support bars, half round and full round bearings, height spacing units and clamps. All these accessories enable specimens to be set up quickly and easily in a variety of arrangements.
A set of hollow steel dial gauge support bars should also be included. The system should be supplied with: A 20 tonne single acting ram on a moveable carriage to fit the 300kN Universal Testing Frame.
Ram operates from a hand pump mounted on a mobile table, with digital pressure indicator and integral shelf, Two hoses with self-sealing couplings to be included, To be used in conjunction 
with the 300kN Universal Testing Frame and its standard set of accessories, A 3.6 m lighting track supplied at 1 m from top edge of the frame, Four flood lamps in fittings that slide in the track To be supplied with a mains connector and 6 m of cable.