High Frequency Oscillators

Order Code: 22236079.4.19

Category: General Lab Equipment I

With panels made in metal case with bench support and the electrical scheme on the front panel. The board must allow the study and the successive experimental verification of the most widespread circuit configurations for high frequency sinusoidal o...



SPECIFICATION

With panels made in metal case with bench support and the electrical scheme on the front panel.
The board must allow the study and the successive experimental verification of the most widespread circuit configurations for high frequency sinusoidal oscillators.

Technical Features:

  • The panel shall include the Colpitts, Hartley and Meissner oscillators carried out with discrete components that are usually used as radiofrequency signal generators, i.e. for frequencies between 100 kHz and 1 GHz.
  • The three analysed configurations could be also operated outside the above mentioned limits but their use is limited from the size and the values of the reactive components that should be used as resonant elements. 
  • Power Supply : +15 V, 100 mA.
  • This  board shall be housed in a module of standard rack sizes of 19 inches: the height of the board is of four rack units.


With this module it must be possible to perform the following exercises:

  • AF1 Colpitts oscillator 
  • Measure of the oscillation frequency 
  • Measure of the triggering current 
  • AF2 Hartley oscillator 
  • Measure of the oscillation frequency 
  • Measure of the triggering current 
  • AF3 Meissner oscillator 
  • Measure of the oscillation frequency 
  • Measure of the triggering current

It must be mounted on an insulated didactic module, it must show a schematic diagram and 2 mm terminals for the electrical connection

Enquiry Form