HART, 475 Field comunicator, Emerson

Order Code: 20213731.1

Category: General Lab Equipment II

Processor, Memory, and Operating System Microprocessor: 800 MHz ARM Cortex A8 / NXP Memory Internal Flash :2 GB NAND and 32 GB extended flash



SPECIFICATION

  • Processor, Memory, and Operating System
  • Microprocessor: 800 MHz ARM Cortex A8 / NXP
  • Memory Internal Flash :2 GB NAND and 32 GB extended flash
  • Operating System :Windows Embedded Compact 2013
  • RAM: 512 MB DDR3 SDRAM
  • Physical 
  • Weight Approximately: 2.9 lbs (1330 grams)
  • Display :5.7 inch (14.5 cm) color VGA resistive touchscreen 640 x 480 pixel
  • Keypad X button – similar to a Back key 4 arrow buttons to navigate menus Checkmark- similar to an Enter key
  • AC Adapter
  • Battery: Rechargeable Lithium- Ion Power Module
  • Operating Time :8+ hours of typical use
  • Charge Time :3 to 4 hours
  • LEDs :6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC  adapter is charging the power module.
  • Battery Charger Options: Input voltage 90-264 VAC, 47-63 Hz Cables included with US, EU, UK, and AU plugs
  • Connections
  • USB: Micro USB Connector. USB 2.0 Remove the USB cable from the Trex unit before connecting to a device.
  • Battery Charger :Barrel Round Plug Tip
  • Wireless
  • Wireless Approvals :FCC, CE, RED and IC Approvals Certified for use in over 100 countries
  • Bluetooth :2.1
  • Range: up to 10 m
  • Wi-Fi :802.11 b/g
  • Range up to 33 m
  • NFC :Active NFC
  • Range up to 20 cm
  • Communication Modules
  • Device Communicator Communication Module
  • HART terminal Enables HART device communication
  • Connectors: Two Banana Jack Plugs
  • Optional Internal Resistor: 250 or 500 Ohm
  • Fieldbus (FF) terminal Enables Foundation Fieldbus device communication
  • Connectors: Two Banana Jack Plugs
  • Device Communicator Plus Communication Module
  • HART terminal Enables HART device communication
  • Connectors: Two Banana Jack Plugs
  • Optional Internal Resistor: 250 or 500 Ohm
  • HART + pwr terminal Enables HART communication with the Trex unit, and provides power to one HART device 
  • in a bench setup.
  • Connectors: Two Banana Jack Plugs
  • Includes HART power supply, resistors (167 Ohm), current control, and ammeter
  • Current Range: 3 -22.5 mA
  • mA terminal (external ammeter) Measures current on a 4-20 mA current loop.
  • Connectors: Two Banana Jack Plugs
  • Current Range: Up to 22.5 mA
  • Resolution: 0.1 mA
  • Fieldbus (FF) terminal Enables Foundation Fieldbus device communication
  • Connectors: Two Banana Jack Plugs
  • FF + FF pwr terminal Provides power to one Foundation Fieldbus device in a bench setup.
  • Connector: One Banana Jack Plug ( Power conditioner included)
  • Current Range: 0- 38 mA
  • Environmental
  • Usage -20°C to +55°C (-4°F to 131°F). 
  • For IS approval: -20°C to +50°C (-4°F to 122°F)
  • Charge +10°C to +45°C (50°F to 113°F)
  • Storage with power module -20°C to +50°C (-4°F to 122°F) (less than 1 month)
  • Storage without power module -20°C to +60°C (-4 °F to 140°F)
  • Enclosure Rating IP54
  • Shock The unit shall survive a 1-meter, all sides and corners drop test onto concrete.
  • Upgrade Studio Requirements
  • Installation Windows 7 Professional Service Pack (SP1) 1 (32 and 64-bit)
  • Windows 10 Professional
  • 512 MB of free disk space
  • A Windows user account with Administrator privileges

Enquiry Form