Flexural Testing Machine Digital - with Manual Pace Control Accessories for Compression Testing Machine

Order Code: MT035

Category: Concrete Testing

Suitable to test as IS:9399. Used for the determination of modulus of rupture of concrete, that is, 15 x 15 x 70 cm or 10 x 10 x 50 cm beams by third point loading method, Complete with motorized pumping unit, Digital Load indicator, To work on 220 V...



SPECIFICATION

Suitable to test as IS:9399. Used for the determination of modulus of rupture of concrete, that is, 15 x 15 x 70 cm or 10 x 10 x 50 cm beams by third point loading method, Complete with motorized pumping unit, Digital Load indicator, To work on 220 Volts AC single Phase

Compliance with following International Standards: As per IS: 516, IS: 9399, BS: 1881, ASTM C78

Construction Details:

  • 100 kN Capacity flexural machine with Digital Load Indicator cum controller
  • The machine consists of a motorized load frame.
  • The lower platen has two rollers, the distance between which is adjustable.
  • For 150 mm x 150 mm x 700 mm beam, the center distance between the rollers is 600 mm, while it is 400 mm for beams  of size 100 mm x 100 mm x 500 mm.
  • The upper platen has also a pair of rollers whose distance is adjustable.
  • The distance between upper roller is 200 mm center to center,  for 150 mm x 150 mm x 700 mm size beam and 133 mm for 100 mm x 100 mm x 500 mm size beam.
  • Microprocessor Based Digital Load Indicator to indicate applied load is fitted in the load frame. 
  • A separate electrically  pumping unit housed in a cabinet is also supplied.
  • On/Off switch and a slow/fast lever to control rate of loading are fitted on the front panel of the pumping unit.
  • A micro switch and relay fitted inside the pressure gauge protects the unit from over loading.

Salient Features of Digital Indicator:

  • Direct reading of total applied load in KN
  • Direct reading of compressive strength in kg/cm2
  • Direct reading of Flexural strength in N/mm2 - no calculation is required
  • Peak hold facility
  • In built memory for last 20 readings.
  • Facility to measure rate of loading in kg/cm2 on press of button.
  • RS 232 interface (Optional - at extra cost)
  • Direct analytical reports on computer (Optional software)
  • Auto generation of load/time graph.(Optional software)
  • Stand by Analog Pressure Gauge for emergency use at extra cost
  • Automatic internal calibration facility
  • Overload safety cut out is provided.
  • Password protected Calibration to prevent unauthorized manipulation

Technical Specifications:
Type of Pumping          :      Electrical
Loading Range             :      100 KN
Least Count                  :      0.5 KN
Overall Dimensions      :    430 X 760 X 1150 (L X W X D) mm
Net weight (in kg)         :    215 kg

Optional Accessories At Extra Cost:
1)  PC link software   2)  Wireless PC link software   3)  Standby pressure gauge                      

Enquiry Form