Experimental Flume

Order Code: 21225313.2

Category: General Lab Equipment I

Description: The experimental flume with a closed water circuit has a cross-section of 309x450mm. The length of the experimental section is 5m. The side walls of the experimental section are made of tempered glass, which allows excellent observation...



SPECIFICATION

Description:
The experimental flume with a closed water circuit has a cross-section of 309x450mm. The length of the experimental section is 5m. The side walls of the experimental section are made of tempered glass, which allows excellent observation of the experiments. All components that come into contact with water are made of corrosion-resistant materials (stainless steel). The inlet element is designed so that the flow enters the experimental section with very little turbulence. The inclination of the experimental flume can be finely adjusted to allow simulation of slope and to create a uniform flow at a constant discharge depth. A wide selection of models, such as weirs, piers, flow-measuring flumes or a wave generator are available as accessories and ensure a comprehensive programme of experiments. Most models are quickly and safely bolted to the bottom of the experimental section

Learning objectives/experiments
Together with optionally available models

  • Uniform and non-uniform discharge
  • Flow formulae
  • Flow transition (hydraulic jump)
  • Energy dissipation (hydraulic jump, stilling basin)
  • Flow over control structures: weirs (sharp-crested, broad-crested, ogee-crested)
  • Flow over control structures: discharge under gates? Flow-measuring flumes
  • Local losses due to obstacles
  • Transient flow: waves

Specifications

  • Basic principles of open-channel flow
  • Experimental flume with experimental section, inlet and outlet element and closed water circuit
  • Length of the experimental section 5m.
  • Smoothly adjustable inclination of the experimental section
  • Experimental section with 20 evenly spaced threaded holes on the bottom for installing models or for water level measurement using pressure
  • Side walls of the experimental section are made of tempered glass for excellent observation of the experiments
  • Experimental section with guide rails for the optionally available instrument carrier.
  • All surfaces in contact with water are made of corrosion-resistant materials
  • Flow-optimised inlet element for low-turbulence entry into the experimental section
  • Closed water circuit with 2 water tanks, pump, electromagnetic flow sensor and flow control
  • Water tanks form a gallery that can be walked on.
  • Models from all fields of hydraulic engineering available as accessories

Technical data : Experimental section

  • Length: 5m
  • Flow cross-section WxH: 309x450mm
  • Inclination adjustment: -0.5…+2.5%
  • Flow bed made of 10mm thick stainless steel
  • Side walls: tempered glass 10mm thick
  • Bottom support of flow bed: rectangular pipe 2 tanks
  • 1100L eachPump:
  • Power consumption: 4kW
  • Max. flow rate: 132m3/h
  • Max. head: 16.1m
  • Speed: 1450min-1 Jacking system
  • spindle lifting worm gear jack Measuring ranges
  • Flow rate: 5.4…130m3/h 400V, 50Hz, 3 phases Accessories provided along with the Experimental Flume.
  • Digital level gauge
  • Instrument Carrier
  • Sluice gate
  • 10 Tube Manometer
  • Sill
  • Crump Weir
  • Venturi- Flume
  • Broad crested weir
  • Sharp crested weir

Enquiry Form