Environmental Chamber (Climate Chamber) For Lithium Battery Testing

Order Code: EV46002

Category: EV Technology Lab

Model : Vertical, floor model Inner : Size in mm 1000 x 1000 x 700mm Capacity : 700 Liters Temperature Range : +20°C to +80°C ( - Degree will be optional cost) Controller : GIC make microprocessor based digital PID temperature controller ...



SPECIFICATION

Model : Vertical, floor model
Inner : Size in mm 1000 x 1000 x 700mm
Capacity : 700 Liters
Temperature Range : +20°C to +80°C ( - Degree will be optional cost)
Controller : GIC make microprocessor based digital PID temperature controller cum indicator will be provided.
Resolution : 0.1°C
Sensor : RTD, PT100, class-A sensor will be provided to monitor the temperature.
Controlling Accuracy : ±1°C
Load : 100 Kg’s maximum
Interior : 1.2mm (18 SWG) thick SS304 with matt finishing will be the inner layer.
Exterior : 1.2mm (18 SWG) thick MS with powder coated will be the outer layer.
Insulation : 100mm thickness high density glass wool insulation will be provided.
Door : Single door, double walled insulated & interior lined with SS304,silicon gaskets for leak proof, lock, handle & heavy-duty hinges for door.
Uniformity : Heavy duty axial fans will be provided for forced air circulation to maintain uniform conditions inside the chamber within permissible limit.
Air Heaters : SS tubular heaters with fins will be provided
Compressor : Hermetically sealed single stage refrigeration system with Emerson make compressor will be provided for Cooling
Condenser & Evaporator : Air cooled type copper tubes & fins will be provided

 

Refrigeration Features

  • Refrigerant-CFC Free (ECO friendly) will be used.
  • Drier for compressor safety will be given.
  • Overload cut off relay for compressor safety.
  • Efficient oil return managing system for protection of compressor
  • The additional isolation suspension channel with antivibration pads are provided to reduce the vibration & noise level
  • High speed axial fan will be provided for better condensation.

 

Electrical Features

  • Schneider make MCB’s & contactors will be provided for motor & other loads
  • L&T make main switch will be provided.
  • Emergency cut-off switch will be provided
  • SSR will be using for Heater efficiency
  • Door interlocking switch will be provided
  • Door open alarm will be provided
  • Fire and temperature retardant wires will be using
  • Ceramic cables will be provided for heaters.
  • High temperature safety cut off through thermostat.
  • Air circulating fan will control by door locking switch.
  • Power supply:230v, single phase,50Hz

 

Enquiry Form