Electrical Machine Trainer

Order Code: 19203328.25

Category: General Lab Equipment III

Machine trainer should be capable to do following experiments using different changeable modules:  To draw BH curve for two different type of sample iron core and compare the result.  To perform turn atio test, OC and SC test on two ...



SPECIFICATION

  • Machine trainer should be capable to do following experiments using different changeable modules: 
  • To draw BH curve for two different type of sample iron core and compare the result. 
  • To perform turn atio test, OC and SC test on two winding single phase transformer. Determine equivalent circuit, regulation, harmonice and efficiency at full load. 
  • Open circuit and load characteristics of DC shunt generator. Maximum voltage built up. Critical resistance and speed. Speed and load test on DC shunt motor. By armature and field control method. Three phase induction motor test to draw torque-speed characteristics and observe the effect of rotor resistance on that. 
  • Block rotor test should be done. 
  • To study No-load characteristics of a 3- phase synchronous generator. 
  • To study load characteristics of synchronous generator with (a) resistive load (b) inductive load and (c) capacitive load. 
  • To study the effect of excitation on performance of a synchronous motor and to plot V- curve. 
  • To study the effect of a capacitor on the starting and running of a single-phase induction motor. 
  • To study the operating characteristics of universal motors 

Features: 

  • Modular and easy to use in electrical laboratories 
  • Equipped with high safety features 
  • Portable and easy to install 
  • Elaborated instruction manual with calculated values 
  • Supplied with patch cords for interconnections & experimental work book 
  • Modular Control Panel 

Technical Specifications: 
Aluminum profile (45mm x 45mm) structure will accommodate different unique interchangeable modules 
Power Requirement: 440V AC , 50Hz, 3 Phase 
MT-E02: Power Supply Module (Three Phase Input) 
MT-E03: Digital Power Analysis Meter Module 
MT-E04: AC Drive Module 1 Phase(10~220 VAC)
MT-E06: DC Drive Module (Thyristorized 0~230 VDC) 
MT-E07: AC Drive Module 3 Phase(10~440 VAC)
MT-E08: Variable DC Voltage Module (10~250VDC) 
MT-E10: Variable Voltage Module - Single Phase Output 
MT-E20: Digital AC Voltmeter Module (0~300V AC) 
MT-E21: Digital DC Voltmeter Module (0~300VDC) 
MT-E27: Digital AC Ammeter Module (0~10A AC) 
MT-E28: Digital DC Ammeter Module (0~10A DC) 
MT-E32: Digital AC Wattmeter Module 
MT-E33: Power Factor Meter Module 
MT-E35: Resistive Load Module 
MT-E36: Rheostat Module (300ohm / 2Amps) 
MT-E38: Inductive Load Module 
MT-E39: Capacitive Load Module 
MT-E64: Three Point DC Starter 
MT-E65: DOL Starter Module 
MT-E66: Slip Ring Starter 
MT-E76: Single Phase Transformer Module (500VA) 
Supplied with AC/DC Machines: 
Technical Specifications: 

  1. DC Shunt Motor 
    1. Capacity : 2HP 
    2. Cage : Steel Body 
    3. RPM : 1500 Approx 
    4. Shaft : Double 
    5. Current : 6 Amp Approx. 
    6. Winding : Armature (A1, A2) , Field (F1, F2) 
    7. Power Requirement: 220V DC 
  2. DC Shunt Generator 
    1. Capacity : 0.5KW 
    2. Cage : Steel Body 
    3. RPM : 1500 Approx. 
    4. Shaft : Single 
    5. Current : 2 Amp Approx. 
    6. Output Terminal : Armature (A1, A2) , Field (F1, F2)
    7. Output Voltage : 180 - 200V DC 
  3. Induction Motor (1 Phase) 
    1. Capacity : 1HP 
    2. Cage : Steel Body 
    3. RPM :1500 Approx. 
    4. Shaft : Single 
    5. Current : 4 Amp Approx. 
    6. Winding : Stator winding, 
    7. Input Terminal : 3 
    8. Mounting : : Foot Mounted arrangement 
    9. Power requirement : 200~220V AC , 50Hz, 1 Phase 
  4. AC Synchronous Motor convertable AC Alternator 
    1. Capacity : 500VA / 1HP 
    2. Cage : Steel Body 
    3. RPM : 1500 Approx. 
    4. Shaft : Double 
    5. Current : 2 Amp Approx. 
    6. Input / Output : R, Y, B and neutral with F1 and F2 
    7. Terminal (field Terminal) 
    8. Input Voltage : 415~440V AC, 50 Hz, Three Phase 
    9. Output Voltage : 415~440V AC, 50 Hz, Three Phase 
  5. AC Slip-Ring Induction Motor 
    1. Capacity : 1HP 
    2. Cage : Steel Body 
    3. RPM : 1500 Approx. 
    4. Shaft : Single, 
    5. Current : 2 Amp Approx. 
    6. Input Terminal : R1, R2, R3 and S1, S2, S3 
    7. Power requirement : 415~440V AC , 50Hz, 3 Phase 
  6. Universal Motor. 
  7. Digital Inline Torque and RPM meter provided to measure torque on load

Enquiry Form