Digital Hydraulics Bench

Order Code: 23246818.1

Category: General Lab Equipment III

 The digital hydraulics bench should provide a controlled re-circulating water supply and accurate flowmeter for hydraulic and fluid mechanics experiments  Electronic flowmeter and digital display for accurate measurements and quicker ...



SPECIFICATION

  1.  The digital hydraulics bench should provide a controlled re-circulating water supply and accurate flowmeter for hydraulic and fluid mechanics experiments
  2.  Electronic flowmeter and digital display for accurate measurements and quicker experiments
  3.  Should be made of lightweight fiberglass for strength, easier transport and long life
  4.  Should have lockable wheels for mobility with stability and flat top to hold different experiment modules
  5.  Self-contained with re-circulating water circuit
  6.  Should not need any external water supply to save mains water Description:
  7.  The body of the bench should form a reservoir or
  8. Sump Tank? with a submersible pump
  9.  Should have a rim around the top to contain any spilled or excess water
  10.  A small recess or
  11. Trough
  12.  in the top should work with a removable drain valve to trap a small volume of water
  13.  It should also catch discharged water from some experiments in the fluid mechanics range
  14.  A hand-operated control valve should adjust the water flow rate from the pump
  15.  An electrical box on the side of the bench should include the pump switch, circuit protection and a digital display of flow
  16.  A sight gauge to the lower side of the bench should allow the user to check the water level inside the tank
  17.  An electronic flowmeter should measure the outlet flow from the submersible pump and the signal from the flowmeter should pass to the digital display to show the flow rate Technical Parameters:
  18.  Sump tank capacity: 100 Litres minimum and 160 litres maximum
  19.  Maximum flow: Min. 50 litres/minute with no experiment module fitted
  20.  Maximum pressure: 450 mbar at working surface height
  21.  Flowmeter display: L.s
  22. 1 and L.min-1
  23.  Resolution: 0.001 L.s-1 and 0.1 L.min-1 01 ? Power source: 220~230V AC, 50Hz, 1 Phase
  24.  Required Accessories: Water additive, datasheet, all necessary pipes, pipe clips and Printed operation manual
  25.  It should be made in accordance with the latest European Union directives
  26.  Warranty: 1 (One) year with services
  27.  Manufacturer's Authorization Letter with contact details, ISO Certificate, CE Certificates and Catalogs should be submitted
  28.  Installation, Testing and Commissioning should be performed by manufacturer's certified engineers (certificates must be submitted along with the tender)
  29.  Country of Origin, Manufacturing and Shipment should be same (Trans-shipment is not allowed)
  30.  Copies of the on-board bill of lading and Country of Origin certificates should be submitted at the time of delivery
  31.  Training: Comprehensive training by manufacturer's certified engineers at customer's premises
  32.  Minimum 05 (five) successful user info with contact details should be supplied for similar training system by the bidder 

Enquiry Form