Digital Hydraulic Bench

Order Code: 22235750.1

Category: General Lab Equipment II

Key Features: Electronic flowmeter and digital display for accurate measurements and quicker experiments Made of lightweight fibreglass for strength, easier transport and long life Lockable wheels for mobility with stability Flat top...



SPECIFICATION

Key Features:

  • Electronic flowmeter and digital display for accurate measurements and quicker experiments
  • Made of lightweight fibreglass for strength, easier transport and long life
  • Lockable wheels for mobility with stability
  • Flat top to hold experiment modules from Fluid Mechanics range
  • Self-contained with recirculating water circuit – needs no external water supply andsaves mains water
  • Pump includes thermal overload protection
  • Many of the hydraulics ancillaries work, free to download Hydraulics Data Management System Software (HDMS)

Key Specifications:

  • Digital flow display 
  • 0.001 L.s–1 and 0.1 L.min–1 resolution
  • Electronic flowmeter
  • Fibreglass construction
  • 160 litres capacity

Description:
This product supplies a controlled flow of water to a wide variety of laboratory experiment modules (available separately). The body of the bench forms a reservoir or ‘sump tank’ with a submersible pump. Once filled, the bench needs no external water supply.
The top of the bench provides a working surface. This will hold one of a choice of experiment modules from Fluid Mechanics range. Larger experiments usually stand next tothe bench. A rim around the top contains any spilled or excess water. A small recess or ‘Trough’ in the top works with a removeable Drain Valve to trap a small volume of water.

It also catches discharged water from some experiments in the fluid mechanics range.A hand-operated control valve adjusts the water flow rate from the pump.

An electrical box on the side of the bench includes the pump switch, circuit protection and a digital display of flow. Four wheels allow the user to move the bench around the classroom. Two wheels have foot-operated locks to hold the bench in position. A sight gauge to the lower side of the bench allows the user to check the water level inside the tank. An electronic flowmeter measures the outlet flow from the submersible pump. The signals from the flowmeter pass to the digital display to show the flow rate. 
The viewing angle of the display allows the user to see it clearly from a normal standing position.If required students can download Hydraulics Data Management System (HDMS) software onto a suitable computer (not supplied) to aid with entering, evaluating and presenting their data.

Available Experiment Modules:
Bench-Mounting:

  • Flow Visualisation 
  • Flow Through an Orifice 
  • Bernoulli’s Therem 
  • Discharge Over a Notch 
  • Friction Loss in a Pipe 
  • Impact of a Jet Apparatus 
  • Flow Measurement 
  • Vortex Apparatus 
  • Francis Turbine 
  • Pelton Turbine
  • Hydraulic Ram Pump 
  • Jet Trajectory and Orifice Flow 
  • Pipework Energy Losses 
  • Flow Meter Calibration 

Free-standing

  • Losses in Piping Systems 
  • 2.5 Metre Flow Channel 
  • Pipe Surge And Water Hammer 
  • Fluid Friction Apparatus 

HDMS
Ancillaries marked 
all work with free (optional) HDMS software
 

Net Dimensions and Weight:
1250 mm long x 780 mm wide x 950 mm high and 50 kg (no water)
 

Sump Tank Capacity:
100 Litres minimum and 160 litres maximum
 

Maximum Flow:
With no experiment module fitted:
50 litres/minute (220V)
47 litres/minute (110V)
 

Maximum Pressure:
450 mbar at working surface height
Flowmeter display:
L.s–1 and L.min–1
 

Resolution:
0.001 L.s–1 and 0.1 L.min–1
 

Accessories (included):

  • Water additive and datasheet
  • All necessary pipes and pipe clips

Operating Conditions
Operating Environment: Laboratory
Storage temperature range: –25°C to +55°C (when packed for transport)
Operating temperature range: +5°C to +40°C

Enquiry Form