Convection and radiation

Order Code: 23246417.44

Category: General Lab Equipment II

Heat  transfer  between  heated  metal  cylinder and  vessel  wall  by  convection  and  radiation, operation with various gases possible, experiments in vacuum or at a slight positive gauge pres...



SPECIFICATION

Heat  transfer  between  heated  metal  cylinder and  vessel  wall  by  convection  and  radiation, operation with various gases possible, experiments in vacuum or at a slight positive gauge pressure, electrically heated metal cylinder in  the pressure vessel as experimental vessel, temperature-controlled heating element, vacuum generation with rotary vane pump, instrumentation: 1 temperature  sensor  on  the  metal  cylinder, 1ower sensor at the heating element, 1 Pirani pressure  sensor, 1 piezo-resistive pressure sensor, and digital displays for temperature, pressure and heating power; and software for data acquisition via USB under Windows 


Technical data

  1. Heating out put 20w
  2. Radition surface area 61cm2
  3. Pressure vessel pressure -1-1.5 bar
  4. Volume 11L
  5. Pump for  vaccum generation Power consumption < 250 W
  6. Nominal suction capacity 5 m3/h 3
  7. Final pressure with gas ballast 3°10 mbar
  8. Final  pressure  without  gas  ballast  Negative pressure3°10 mbar
  9. Measuring ranges 0.5'10 1000 mbar Negative pressure  -1-1.5 bar rel Pressure 0-250 °C
  10. Temperature 0-250 °C
  11. Power supply 230V, 50Hz, 1 phase
  12. Dimensions  (LxWxH)  <1340  x  790  x  1500 mm
  13. Weight <160 Kg
  14. Other considerations
  15. Manual (English) Full Experiment and operation

Enquiry Form