Order Code: MT012
Category: Concrete Testing
Compliance Standards : IS:14858 ? 2000 and IS 516 Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Manual pace rate control, auto stop and manual releas...
Compliance Standards : IS:14858 ? 2000 and IS 516
Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Manual pace rate control, auto stop and manual release on failure of test specimen. Reading of Load in KN and N/mm2 with auto calculation. with Pace Rate indication. Manual Pace rate Control will have certain limitations. CTM with Automatic Pace rate control is recommended for accurate Pace rate Setting.
Introduction
The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The digital machines are provided with a MANUAL pace rate controller, to enable maintain a constant rate of loading.
Salient Features
Scope of supply
Salient features of data manager PC software (Optional At Extra Cost.)
Note :
Use of 3 KVA three phase servo controlled stabilizer is essential to protect the machine against voltage fluctuations. Warranty voids in case of any damage due to power fluctuation.
Technical Specification |
|
Capacity |
1200 kn |
Platen size in mm |
265 mm dia |
Ram Dia in mm |
165 mm |
Ram Travel in mm |
50 mm |
Vertical daylight in mm |
300 mm |
Horizontal daylight in mm |
300 mm |
Weight approx in kg |
- |
Platen hardness |
More than 550 Vickers hardness |
Electric Motor |
1 HP, Single Phase |
Operation on |
220 V AC Single Phase. |
Least count |
0.1 KN or better |
Pace rate control |
Manual control from 1 KN/Sec to 20 KN/sec |
Pumping |
Motorized |
Pump Speed |
Dual speed |
Motor |
Induction Motor |
Reading |
Digital |
Accuracy |
± 1% |
Release valve operation |
Required |
Auto stop after failure of specimen |
Available, machine stops after completion of test Auto Release of Pressure after specimen failure Not Available, Need to release pressure manually after the completion of test |
Calculation of result |
Automatic |
Holding of Max.Load |
Available |
Pace Rate or Rate of Loading indication |
Available |
Operator skill to control Pace Rate |
Required and very difficult to maintain |
Bar Graph |
Available |
Multi Channel operation |
3 channel operation possible, flexural and compression frame can be attached |
Load indication and Control |
Digital membrane key pad controller |
Saving of records |
Possible-10 reading |
Pen drive slot |
Optional, saves reading in excel format, Record date-time, Sr no and Peak load |
Real time graph |
Not Applicable |
Printer interface (Direct connectivity to printer w/o computer) |
Available at extra cost |
Computer operation software and data Acquisition software |
Available at extra cost |
Displacement controlled operation |
Not Available |
Modulus of Elasticity Calculation |
Not Available |
Flexural attachment |
Possible, all calculations will be made automatically |
Splitting Tensile Test |
Possible but manual calculation required |
LAN Connectivity |
Not Available |
Auto internal Calibration without proving ring |
Available |
Piston over travel safety cut off |
Available at extra cost |
Over load safety cut off |
Available |
Shot circuit protection |
Available |