Compliance with following international standards - IS 516, IS 14858. Detailed specification as follows:

Salient Features:

• Aesthetically designed unit
• The electric pumping unit is fixed with a micro?switch to switch off the motor automatically as the load on the machine approaches the rated capacity.
• The unit is equipped with a 8" dia pressure gauges with maximum red pointer.
• Four column high stiffness and high stability fully welded construction of the loadframe.
• Construction Details
• The compression testing machine consists of separate pumping unit and loading unit. Detailed descriptions of both the devices are narrated below.

Loading Unit

• The upper platen has got a self aligning action and is attached to a rigid cross head plate.
• The lower platen rests on the jack ram and is positioned with the help of a centering pin.
• Loading is accomplished by upward movement of lower platen.
• A dust cover is provided on the jack to prevent any dust from going into the cylinder.
• A spacer with a centering locating pin is provided to test small specimens.
• The lower and upper platens of the machine are hardened ground and polished.

Pumping Unit

• The pumping unit is a separate unit connected to the jack by means of a high pressure hose pipe.
• A junction box is suitably fixed to connect the motor to the mains through a push button starter.
• Calibrated against N.P.L. Tested Master Gauge or Proving Ring.
• A max red pointer is provided to facilitate taking readings after failure of the specimen.
• The pressure gauge is fixed at an Angle for easy readability.

Scope of supply

• High strength rigid structure (Loading Frame)
• Pumping unit (Oil source cabinet)
• Pressure gauge 
• Pair of compression platens 
• High pressure hose pipe