CO2 incubator

Order Code: 24257322.1.7

Category: General Lab Equipment V

Copper-made container or chamber Measured in cubic metres, the capacity is 150 liters (5.3 cubic feet). O2 Concentration Range: Not Required between 1 and 21%, or between 5 and 90%.  Built-in water tank serves as the primar...



SPECIFICATION

  • Copper-made container or chamber Measured in cubic metres, the capacity is 150 liters (5.3 cubic feet).

  • O2 Concentration Range: Not Required between 1 and 21%, or between 5 and 90%. 

  • Built-in water tank serves as the primary source of humidity

  • RS230 for the transmission of data 

  • A concentration of carbon dioxide ranging from 0 to 20%;

  • Making use of LED lighting

  • Temperatures ranging from -2 degrees Celsius to 54 degrees Celsius are possible. 

  • The dimensions (depth x width x height) of the inside are as follows: 20.9 inches by 18.5 inches by 23.9 inches; 158 pounds weight. 

  • Voltage equal 220 v

  • The direct heat chamber is a specialized enclosure designed for the purpose of applying heat directly to a target object or material.

  • The chamber is constructed entirely of copper, ensuring a strong composition.

  • Additionally, it possesses a compact footprint, allowing for convenient stacking.

  • The door swing is of a standard configuration, specifically designed for left-hand operation. 

  • The assembling process of the product is designed to be minimal and user-friendly, allowing for easy cleaning. 

  • The interior chamber of the product is designed to have a smooth surface, and the corners are rounded.

  • The in-chamber fan facilitates the gentle distribution of conditioned and humidified air within the chamber. 

  • In situ sensors and probes that are specifically engineered for accurate monitoring;

  • The selection of a carbon dioxide (CO2) sensor for extended and dependable functionality, or an infrared (IR) CO2 sensor for the purpose of monitoring in situations where humidity and temperature exhibit greater variability

  • The utilization of dual temperature probes equipped with excessive temperature protection.

  • The water reservoir is specifically engineered to be directly heated, with the primary objective of maintaining a consistent and elevated level of relative humidity. 

  • This design feature serves the purpose of safeguarding against the dehydration of cultures.

  • The pan-less technology exhibits recovery rates that are up to five times faster compared to conventional water pans.  

  • It has a length of 30.8 inches, a width of 25.1 inches, and a height of 24.1 inches. 

  • The ContraCon 90°C moist heat disinfection cycle is a method utilized for the purpose of disinfection.

  • The utilisation of an on-demand cycle streamlines the process of cleaning and obviates the necessity of autoclaving components individually. 

  • The operation is straightforward and may be easily executed by pressing a button, without the need to remove any sensors or other components.

Enquiry Form