Bench-top Digital Storage Oscilloscope (100Mhz)

Order Code: 21224902.2.1

Category: General Lab Equipment II

Purpose : Is used in repair and development of electronic workshops to store, display, analyze waveforms and measure electronic signals. In effect, measures of voltage and time by drawing a graph of the instantaneous signal voltage as a function...



SPECIFICATION

Purpose : Is used in repair and development of electronic workshops to store, display, analyze waveforms and measure electronic signals. In effect, measures of voltage and time by drawing a graph of the instantaneous signal voltage as a function of time.

Type : 2 channel Digital Storage

Band width : 100MHz

Sample rate : 5 Giga Sa /s all channels

channels record length : 4 Mpts

Memory depth : Standard 4MP/s

Waveform update range :  ≥ 1,000,000 waveforms/sec

Input impedance : Selectable : 1 MΩ ± 1% (14 pF), 50 Ω ± 1.5%

Input sensitivity range : 1 mV/div to 5 V/div2 (1 MΩ and 50 Ω)

Vertical resolution : 8 bit resolution

Input range : 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk with 10:1 probe: 300 Vrms

Rise time : <3nS

DC vertical gain accuracy : ± 2.0% full scale

modes : 

  • Main, zoom, roll, XY
  • DC gain accuracy
  • ± 3% for sample or average acquisition mode

Probe

Passive probes that mach the oscilloscope bandwidth and with 10:1 attenuation

Sample rate and display : ± 100ppm over any ≥ 1 mS time interval time accuracy

Triggering modes : Normal, auto, single event and force

Waveform mats : Arithmetic and FFT (Add, subtract, multiply, divide, differentiate, integrate, FFT, Ax + B and more )

Connectivity

  • USB device port for easy connection to a PC or direct printing to a printer and USB keyboard
  • WVGA video out to export the oscilloscope display to a monitor or projector
  • GPIB, LAN (10/100Base-T)

Display

  • 800 x 480 pixel resolution , 8.5 inch LCD or grater
  • With > 1,000,000 waveforms/s

Features

  • variable trigger with hold off
  • high resolution, high contrast LCD display with temperature compensation
  • setup and waveform storage
  • video trigger capability
  • R-232 and GPIB communication ports

Power requirement

  • 220V, 50Hz
  • IEC World plug type F or EEC3/7 (Schuko)

Warranty

2 years starting from the date of acceptance testing approval

Certification

  • Calibration valid for 2 years, certificate attached
  • EMC meets or exceeds IEC 61326-1:2005/EN61326-1:2013

Technical Documentation

User, installation and service manuals is to be supplied in English language

Enquiry Form