Features

• Industrial-standard sensors and transducers
• With USB interface
• Open-ended design, ideal for expansion
• Offer a sensing data acquisition software

Specifications:

Main Unit

1. Power Supply Unit
    Fixed DC power supply
    (1) Output voltage : +5V, -5V, +12V, -12V
    (2) Max. output current : +5V/3A, -5V/0.3A, +12V/1.5A, -12V/0.3A
    (3) With output overload protection

 2. A/D Converter : 1x12-bit ADC
   (1) Input voltage range : 0 ~ +5V
   (2) Time pulse frequency : 3.58 MHz
   (3) Control signals : Status, pole, over range indication

 3. Interface Port
    USB interface : Type B

 4. D/A Converter : 1 x 12-bit DAC
    Analog output & control
    OUT+ : +DC OFFSET 0V ~ +4.096V unipolar
    OUT- : -DC OFFSET 0V ~ - 4.096V unipolar
    OUT BP : DC OFFSET -2.048V ~ +2.048V bipolar

 5. Preset Level
    Max. value : 4095

 6. Status Display & DCV
     Input voltage measurement
     a. Range : 2000mV, 20V
     b. Accuracy : ±0.05% of reading + 4 counts
     c. Input impedance : 10MΩ
     d. Display : 4 ½ digits

 7. Mode Selector
      Manual / single-chip

 8. Buzzer
      Maximum input signal voltage : +12V

 9. Micro controller Signals
      5 Control line outputs

 10. Model Holder : X4

 11. Potentiometer : 100KΩ B-type

 12. Comparator
      V-,V+ input, Vo output

 13. Differential amplifier
      V-,V+ input, Vo output

 14. Instrumentation amplifier
      V-,V+ input, Vo output, adjustable gain

Experiment Modules
1. Using 2mm plugs and sockets
2. Comprehensive experiment manual
3. Modules secured in plastic housings
4. Connected by 2mm-2mm test leads
5. Dimension : 255 x 165 x 30mm
6. Circuit symbols, blocks and components printed on the surface of each module
7. Power supplied from KL-61001B main unit Graphic User Interface Software

System Requirements

1. PC: 1GHz or faster 32-bit (x86) or 64-bit (x64) processor, 1GB RAM, 1 GB more free disk space
2. Operating System : XP/ Vista/ 7/8/10

Specification & Feature
1. Real time acquire signal
2. Adjustable acquire frequency
3. Current, Min and Max value displayed
4. Data save, load and print function
5. X-axis : TIME/DIV
    Y-axis : VOLT/DIV
6. Storage format : Excel format

    List of Modules

   KL-64001A

    1. Photo transistor
    2. Photo interrupter
    3. Magnetic (hall-effect) ~ digital
    4. Magnetic (hall-effect) ~ analog

  KL-64002

    1. Pyroelectric detector
    2. Reed switch
    3. Thermistor
    4. Mercury switch

  KL-64003A

    1. Limit switch
    2. Vibration switch
    3. Condenser microphone
    4. Dynamic microphone

  KL-64004

    1. Gas / smoke sensor
    2. Ethanol sensor

 KL-64005A

   1. IC (AD590) temperature sensor
   2. Humidity sensor
  (1) Humidity transducer rated voltage : 1 Vp-p AC
  (2) Frequency range : 100Hz ~ 10KHz
  (3) Temperature range : 0°C ~ 60°C
  (4) Humidity range : 20%RH ~ 90%RH
  (5) Impedance : 13KΩ (70%RH at 25°C)

    KL-64006

   1. Infrared TX / RX sensor
      (1) Infrared transmitter : Emission intensity : 12mW/sr
      (I = 50mA)
      Emission wavelength : 940nm
      (IF = 50mA)
      (2) Infrared receiver : Sensitivity wavelength : 1000nm

    2. Ultrasonic TX / RX sensor
        Norminal frequency : 40KHz
 

   KL-64007A

   1. Pressure sensor
       0-7 psi to 0-30 psi pressure ranges
   2. Strain gauge
       (1) Maximum payload : <5kg
       (2) Teminal resistance : 350 ± 50Ω
   

   KL-64008

1. Hall current sensor

    (1) Nominal current : ±3A
    (2) Current range : ±9A
    (3) Output voltage : ±4V, RL = 10 k Ohms

 2. Proximity sensor
    (1) Operation voltages : 10 ~ 30V DC
    (2) Short circuit protection
 

   KL-64009

   1. CDS sensor
   2. Photovoltaic sensor
      (1) Photovoltaic transducer open voltage = 2V
      (2) Photovoltaic transducer close current = 0.06 μA/lx
 

    KL-64010

   1. V/F converter
      (1) Input voltage : +10mV ~+10V
      (2) Output frequency : 5Hz ~ 5KHz, 10Hz ~10KHz
 

    KL-64011

    1. F/V converter
        (1) Input frequency : 0 ~ 4.3KHz ( ±0.2Vp ~ ±5Vp)
        (2) Output voltage : 0 ~ 4.3V DC

   KL-64012

1. RTD (PT-100)
    (1) 0°C : 100Ω , 100°C : 139.16Ω
    (2) Rating : 250°C

   KL-64013
 

1. Level (Water)
    Simulation of the reservoir control status (motor included)

  KL-64014

1. Fiber optic emitter
    (1) Forward current, DC (lF) : 50mA
    (2) Peak wave length : 950nm
    (3) Output power : 50μw

2. Fiber optic phototransistor
   (1) λpeak : 850nm
   (2) Collect current (lC) : 50mA
   (3) Power dissipation : 100mw

  KL-64015

1. LVDT
   (1) Range : ±5mm
   (2) Scale : 0.01mm
   (3) Optimum frequency : 50Hz ~ 1.1KHz
   (Nominal : 350Hz)

  KL-64016

1. Rotation angle sensor
    (1) 10 turns (3600°) precision potentiometer
    (2) Linearity : ± 0.25%

List of Experiments
 1. D/A and A/D Converters
 2. Characteristics of Sensors
 3. Gas Sensors
 4. AD590 Temperature Transducer
 5. Hall Current Sensor
 6. PT100 Temperature Sensor
 7. Humidity Sensor
 8. Strain Gauge
 9. Linear Variable Difference Transformer (LVDT)
10. Photovoltaic Cell
11. Proximity Switch
12. Infrared Transducer
13. Ultrasonic Transducer
14. Pressure Sensor
15. V/F and F/V Converters
16. CdS Cell
17. Level Controller
18. Fiber Optical Communication
19. Rotation Angle Sensor

Accessories
1. Experimental manual
2. Connection leads and plugs : 1 set

Required Documents:
1.Manufacturers Authorization Letter with contact Details must be Submit.
2.ISO/CE Certificate must be Submit.
3. Catalog/ Brochure must be Submit.
4. Installation, Testing, and Commissioning, mandatory Training as requirement (with training 
    manual Simulation software CD for each experiment).