ARM7 Development Platform without zigbee module

Order Code: 43558C

Category: Embedded Trainers

Modular Embedded Development Platform 43558C serves as a 32 bit development platform and provide means for code development. This Development Platform based on ARM7TDMI Microcontroller (LPC2148) with 512KB on chip memory This platform is designed to ...



SPECIFICATION

Modular Embedded Development Platform 43558C serves as a 32 bit development platform and provide means for code development. This Development Platform based on ARM7TDMI Microcontroller (LPC2148) with 512KB on chip memory This platform is designed to explore ARM architecture and supporting peripherals, an ideal platform for extensive Embedded product development. The 43558C provides USB connection that can be used to download firmware, allows users to evaluate, prototype and create application specific designs.

Modular Embedded Development Platform

Features

  1. ARM7 Controller based on LPC 2148
  2. On board USB programmer
  3. USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM
  4. Learning of USB Protocol like HID, CDC and MSD
  5. Master Reset/Restart Key for hardware reset
  6. RTOS supported (RTX, mC/OS-II )
  7. On board USB (UART0) and UART1 Interface
  8. On board Temperature Sensor
  9. On board 16X2 LCD Display
  10. On board 10-bit DAC provides variable analog output
  11. On board PWM and Interrupt
  12. On board facility to connect JTAG Programming and debugging
  13. All GPIO’s are provided on 6 connectors (10X2)
  14. Wireless module adapter for optional - 2.4GHz ZigBee (Xbee) / Bluetooth /Wi-Fi connectivity
  15. Motor driver circuit for DC and Stepper Motor
  16. I2C and SPI Interface connector
  17. On board 8 LED
  18. On board 4X4 Hex keypad interface
  19. Inbuilt Real Time Clock with Battery holder
  20. On board switch
  21. 128 byte of I2C external EEPROM
  22. RS485 Interface connector
  23. Expansion connectors for plug in modules and prototyping area
  24. Controller module is detachable, user can use other controller as well

Object

  1. Study of ARM7(LPC2148) Microcontroller architecture
  2. Pin to pin study of MCU
  3. Study and Interface serial protocol (I2C, SPI, UART)
  4. Study and Interface internal PWM, Timer, Interrupt
  5. Study and Interface LED and Temperature sensor
  6. Study and Interface Internal Real Time Clock (RTC)
  7. Study and Interface of EEPROM memory
  8. Study of Internal ADC and DAC
  9. Study and Interface of Stepper Motors
  10. Study and Interface of 4X4 Hex keypad
  11. Study and Interface16X2 LCD
  12. Study of RTOS signal, semaphore, mutex, mailbox and priority scheduling
  13. Study and Interface various external MCXX series modules

Technical Specifications

MCU                                        : LPC2148

External memory                     : EEPROM

Crystal Frequency                   : 12 MHz

LEDs                                       : 8 nos.

ADC                                        : 14nos. Internal 10 bit ADC

DAC                                        : 10 Bit internal DAC

Interrupts                                 : 4 nos

Variable Supply                       : 0-3.3 Volt

RTC                                        : 32.768KHz, 3.3V Battery

PWM                                       : 7 nos

Sensor                                    : LM35

Display                                    : 16X2 LCD Display

Motor Drive                             : L293D 600mA (5-12V)

GPIO’s                                    : All GPIO Pins

Communication                       : USB 2.0 Full speed device control interfaces

Programmer                            : USB Interface

Programmer Mode                  : Run/ISP switch selection

Baud Rate                               : 9600 bps (Default)

Interconnections                     : 2 mm Patch chords with FRC Cables

Dimensions (mm)                   : W 326 x D 252 x H 52

Power Supply                          : 110V - 260V AC, 50/60Hz

Weight                                     : 1.5Kg (approximately)

Operating Conditions               : 0-40 C, 80% RH

OS Support                              : Windows XP, 7 & 8 (32bit and 64 bit)

Included Accessories               : USB cable, Mains cord, 2mm Patch cords,20 Pin FRC cable, SMPS, Stepper motor.

Optional

  1. Tesca makes TCM Series extension module to interface with this platform.

 

Enquiry Form