Arduino Ethernet

Order Code: 19203472.13

Category: General Lab Equipment III

Arduino Ethernet; Analog Input Pins = 6; DC Current for 3.3V Pin = 50 mA; Flash Memory = 32 KB (ATmega328) of which 0.5 KB used by bootloader EEPROM = 1 KB (ATmega328); Clock Speed = 16 MHz; other requiremetnts = W5100 TCP/IP Embedded ...



SPECIFICATION

  • Arduino Ethernet;
  • Analog Input Pins = 6;
  • DC Current for 3.3V Pin = 50 mA;
  • Flash Memory = 32 KB (ATmega328) of which 0.5 KB used by bootloader
  • EEPROM = 1 KB (ATmega328);
  • Clock Speed = 16 MHz;
  • other requiremetnts = W5100 TCP/IP Embedded Ethernet Controller,
  • Power Over Ethernet ready Magnetic Jack,
  • and Micro SD card, with active voltage translators;
  • Microcontroller = ATmega328;
  • Operating Voltage = 5V;
  • Input Voltage Plug (recommended) = 7-12V
  • Input Voltage Plug (limits) = 6-20V;
  • Input Voltage PoE (limits) = 36-57V;
  • Digital I/O Pins = 14 (of which 4 provide PWM output);
  • Arduino Pins reserved = 10 to 13 used for SPI, 4 used for SD card and 2 W5100 interrupt (when bridged);
  • DC Current per I/O Pin = 40 mA;
  • SRAM = 2 KB (ATmega328);

Enquiry Form