The Analog and Digital Electronics System Lab has the following features:

1.Suitable for basic electric circuits, linear circuits, combinational logic, sequential logic, microprocessor circuits, and FPGA.

2. User-friendly comprehensive power supply, function generator/counter, digital meter, analog meter and testing devices.

3. Universal breadboard (1440 tie points) for circuit design, faya-Nugget breakout boards NGT-series and prototyping.

4. Tie points fitting solid leads AWG#22~30 (0.3~0.8mm).

5. USB Interface for optional for aduino Nano board, FPGA, MCU.

6. Peripheral hardware: LED, Joystick switch, Rotate switch, Potentiometer, Pulser switch, Rotary encoder, Data switches, Speaker, Power supply, Digital displays, Function generator/counter, DCV/DCA meter, Analog meter, etc.,

7. Options: FPGA board (with USB Blaster), MCU board, for-Nugget Combo Pack.

Interactive learning system combining theory and practical exercises : Allows you to conduct at least 100 different interactive courses with the same interface. Interactive content in scorm format, Direct integration into LMS learning platforms such as Moodle is possible Includes at least the following items with the following minimum characteristics:

1x Semiconductor components course 1 Experiment card with diode circuits (Si, Ge and Zener diodes) 1 Experiment card with photocell light barrier and stabilising circuit using Zener diode 1 Experiment card with transistor circuitry for building various circuits (emitter and collector followers, with/without feedback) Storage case 1x Transistor multivibrators course 1 Experiment card with astable multivibrator using discrete components 1 Experiment card with bistable multivibrator using discrete components 1 Experiment card with monostable multivibrator using discrete  components Storage case 1x Transistor and amplifier circuits course 1 Experiment card with 2 multi-stage amplifier circuits with modifiable feedback 1 Experiment card with differential amplifier built with discrete components 1 Experiment card with 2 constant current sources (FET and bipolar transistors) Storage case 1x Field effect transistor course 1 Experiment card with 2 FET circuits built using discrete components JFET circuit, configurable as common source or common drain circuit Push-pull amplifier circuit using MOSFETs Storage case 1x Operational amplifiers course 1 Experiment card with inverting and non-inverting op-amp circuits 1 Experiment card with comparator and Schmitt trigger circuit with adjustable reference voltage 1 Experiment card for the assembly of various operational amplifier circuits (active filter, precision rectifier, derivative-action element, integral-action element, constant current source, precision voltage source) with adjustable reference voltage and variable load resistor Storage case 1x Gates and flip-flops course 1 Experiment card with logic gates (NOT, AND, OR, NAND, NOR, EXOR, EXNOR) and a sequence of gates 1 Experiment card with JK flip-flop Storage case 1x Sequential circuits course 1 Experiment card with NAND, NOR gates and flip-flops for building sequential circuits 1 Experiment card with synchronous binary counter, configurable as up or down counter Storage case 1x Application circuits course 1 Experiment card with 2 single-bit and 2 4-bit adders 1 Experiment card with 8-bit multiplexer/demultiplexer Storage case 1x Converter circuits course 1 Experiment card with 1 D/A converter with weighted resistors and 1 D/A converter with R-2R network, built using discrete components 1 Experiment card with 1 A/D converter using single-/dual-slope method and 1 A/D converter using parallel method (flash converter), built using discrete components 1 Experiment card with 1 V/f converter and 1 f/V converter Storage case 1x Interface for Interactive blended learning system assembling theory and practical exercises Adjustable analog output, +/-10 V, 0.2 A, DC – 5 MHz, via BNC and 2- mm sockets 4 Analog differential amplifier inputs with 10 MHz band width, safe for voltages up to 100 V, sampling rate 100 megasamples, 9 measuring ranges, memory depth 4 x 8 k x 10 bits, inputs via BNC (2 inputs) or 2- mm sockets (4 inputs) 2 Analog inputs for current measurement, overcurrent-protected up to 5 A, sampling rate 250 kilo samples, 2 measuring ranges, resolution 12 bits, connection via 2-mm sockets Power supply unit (0-10V adjustable DC, function generator, AC, 3- phase, 3x DC adjustable +/-20V) USB and WIFI interface for real time data displaying on integrated virtual instruments on PC (voltmeter, ammeter, oscilloscope 4-channel, vector analysis, spectra analysis, 3-phase power source,…) 2x Experiment Unit to be connected to the interface; can also be used in a DIN A4 frame All accessories necessary for proper operation must be provided, with at least the following: 1x Measuring accessories (card with measuring shunt, 22 measuring cables 2mm, 10 bridge plugs 2mm/5mm) 1x Interactive multimedia courses Interactive experiment setups with animation Measured values and diagrams can be stored in the experiment instructions per drag and drop Direct link to instruments/measurement and test software from the experiment instructions Includes questions with feedback and evaluation logic for progress monitoring Documents can be printed out for hardcopy of experiment instructions including solutions 1x Standard branded PC with 24'' screen, adapted keyboard, Windows 10 or 11, UPS, spare battery

Technical Clauses:

• The bidder must present a manufacturers authorization
• Training manual for the items Deliver packages (demo or Lab Manual) needed for conducting experiment using these items
• The supplier must provide one week training to 15 trainers