AM or FM Transmitter & Receiver

Order Code: 20213856.6

Category: General Lab Equipment IV

System Specification: Oscillator Mode: Quartz crystal oscillator Carrier Frequency Range: 1 MHz, 4MHz(SSB),4.5MHz(DSB) Ability to transmit audio Signal SSB/DSB Modulator and Demodulator By using DIP switches for the fault simulation Freque...



SPECIFICATION

  • System Specification:
  • Oscillator Mode: Quartz crystal oscillator
  • Carrier Frequency Range: 1 MHz, 4MHz(SSB),4.5MHz(DSB)
  • Ability to transmit audio Signal SSB/DSB Modulator and Demodulator By using DIP switches for the fault simulation
  • Frequency Response: 400 Hz ~ 8 kHz
  • Transmitter Specification:  
  • Transmitter Mode: Direct up conversion transmission Transmitted Power > 0 dBm Carrier-to-noise Ratio > 100 dB
  • Tunable audio signal source (Audio signal frequency: 100Hz-1kHz)
  • High sensitivity microphone SSB/DSB Modulator  By using DIP switches for the fault simulation
  • Receiver Specification:
  • Receiver Mode: Heterodyne Receiving Sensitivity < -70 dBm AM receiver carrier frequency : 565kHz-1605kHz
  • Audio Output Power: 0.2 W
  • SSB/DSB Demodulator By using DIP switches for the fault simulation
  • System Specification: Oscillator Mode: Quartz crystal oscillator
  • Carrier Frequency: 100 MHz
  • Ability to transmit audio Signal Sensitivity < -70 dBm
  • By using DIP switches for the fault simulation
  • Frequency Response: 400 Hz ~ 8 kHz
  • Transmitter Specification:
  • Transmitter Mode: Direct up conversion transmission
  • Transmitted Power > -3 dBm Carrier-to-noise Ratio > 100 dB
  • Tunable audio signal source (Audio signal frequency: 100Hz-1kHz)
  • High sensitivity microphone FM Transmitted carrier frequency: 100MHz
  • By using DIP switches for the fault simulation
  • Receiver Specification:
  • Receiver Mode: Supper Heterodyne Receiving Sensitivity < -70 dBm
  • FM receiver carrier frequency : 88MHz-108MHz Audio Output Power: 0.2 W
  • By using DIP switches for the fault simulation Function Generator and DC Power Supply  
  • Waveforms: Sine, Triangle, Square, TTL
  • Pulse Amplitude: >10Vpp
  • Impedance: 50Ω, ± 10% Duty Control: 30% ~ 60%
  • Display: 6-Digit LED  
  • Frequency Range: 10Hz ~ 100 kHz (4 Ranges)
  • Frequency Range: 100Hz ~ 1 MHz (4 Ranges)
  • Constant Voltage Output: ± 5V, ± 12V
  • Variable Voltage Output: 0V ~ ± 15V
  • Power source: 220~230V AC, 50Hz, 1 Phase

Enquiry Form