AAS spectrophotometer

Order Code: 21224902.1.1

Category: General Lab Equipment II

Purpose: Is used in repair and development of electronic workshops to store, display, analyze waveforms and measure electronic signals. In effect, measures of voltage and time by drawing a graph of the instantaneous signal voltage as a function of ti...



SPECIFICATION

Purpose: Is used in repair and development of electronic workshops to store, display, analyze waveforms and measure electronic signals. In effect, measures of voltage and time by drawing a graph of the instantaneous signal voltage as a function of time.

Type:

  • 2 channel Digital Storage
  • Band width: 100MHz

Sample rate: 5 Giga Sa /s all channels

channels record lengthMemory depth: Standard 4MP/s

Waveform update range: ≥ 1,000,000waveforms /sec

Input impedance: Selectable :1 MΩ ± 1% (14 pF), 50 Ω ± 1.5%

Input sensitivity range : 1 mV/div to 5 V/div2 (1 MΩ and 50 Ω)

Vertical resolution: 8 bit resolution

Input range: 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk with 10:1 probe: 300 Vrms

Rise time: <3nS

DC vertical gain accuracy: ± 2.0% full scale

modes: Main, zoom, roll, XY

DC gain accuracy:± 3% for sample or average acquisition mode

Probe: Passive probes that mach the oscilloscope bandwidth and with 10:1 attenuation

Sample rate and display: ± 100ppm over any ≥ 1 mS time interval

Triggering modes: Normal, auto, single event and force

Waveform mats: Arithmetic and FFT (Add, subtract, multiply, divide, differentiate, integrate, FFT, Ax + B and more )

Connectivity :

  • USB device port for easy connection to a PC or direct printing to a printer and USB keyboard
  • WVGA video out to export the oscilloscope display to a monitor or projector
  • GPIB, LAN (10/100Base-T)

Display: 800 x 480 pixel resolution , 8.5 inch LCD or grater

With > 1,000,000 waveforms/s

 

Features:, variable trigger with hold off; high resolution, high contrast LCD display with temperature compensation; setup and waveform storage;

video trigger capability;

  • R-232 and GPIB communication ports;
  • Power requirement: 220V, 50Hz
  • IEC World plug type F or EEC3/7 (Schuko)

Warranty: 2 years starting from the date of acceptance testing approval

Certification:

  • Calibration valid for 2 years, certificate attached
  • EMC meets or exceeds IEC 61326-1:2005/EN61326-1:2013

Technical Documentation: User, installation and service manuals are to be supplied in English language

Enquiry Form