A typical set of educational equipment "Energy saving in power consumption systems"

Order Code: 19204111.7

Category: General Lab Equipment III

The peak load monitoring function record power consumption. The peak load must be with opportunities  monitoring function  controlled by one of the parameters: active power, apparent power, three-phase total current. The components of ...



SPECIFICATION

  • The peak load monitoring function record power consumption. The peak load must be with opportunities  monitoring function  controlled by one of the parameters: active power, apparent power, three-phase total current.
  • The components of training kits: Resistive load-1 pc.
    1. Capacitive load - 1 pc.
    2. Inductive load - 1 pc.
    3. Power analyzer- 1 pc.
  • The delivery set must include all necessary components (set of connecting wires, software, stand frame, etc.)
  • Energy metering and peak load monitoring.
  • Resistive load: three synchronously adjustable circular rheostats each with a series resistor and a fuse in the sliding contact connection, suitable for example: for parallel, series, star-shaped and triangular circuits.
  • Series resistance about: 3 x 22 ohms. Current: 3 x 2.5-3 A.
  • Capacitive load must be: 3 groups of capacitors, each of which consists of four capacitors, suitable for parallel, series, star-shaped and triangular circuits.
  • Capacitor capacity must be with parameters : - 3 x 2/4 uF, 450 V and - 3 x 8/16 uF, 400 V.
  • Inductive load must be with parameters 3 inductors with taps of approximately 0.25 A to 5 A, suitable for parallel, series, star-shaped and triangular circuits
  • Power analyzer must be with parameters:
  • The power analyzer is a combination of an isolated and differential oscilloscope, a multimeter, a wattmeter, an energy analyzer and a recorder. Must have possibilities in concept for demonstration and laboratory experiments. simultaneous measurement over 4 channels: instantaneous voltage, current,
  • Averaged voltage and current,
  • RMS voltage and current,
  • Fundamental wave filters,
  • The ability to manually control directly on the device using the rotary switch with the cursor keys;
  • Must have  backlit display,
    1. Display of all measured values ??on one display,
    2. Display all values ??for each channel,
    3. Display all values ??in tabular form,
    4. Display of measured values ??on a graph,
    5. Display a vector diagram. Must have possibility wireless connection for experimenting with a tablet and smartphone (iOS, Android and Windows). Real-time processing in the device allows you to perform complex network analysis in three-phase networks, which are displayed directly on the device in a vector diagram.
  • Must have three-phase power supply for switching three-phase power in experiments with electrical loads to a voltage of 400 V.
    1. 4-pole switch;
    2. Residual current device about 30 mA;
    3. Motor protection switch in the range from 6 to 10 A;
    4. Warning lamps line 1,2,3
    5. Network cable.
  • Equipment must comply with applicable standards. Acceptable "Variations ± 15% of the required parameter values, provided that such changes do not affect the intended functionality of the equipment"

Enquiry Form