A typical set of educational equipment "Electricity supply”

Order Code: 19204111.1

Category: General Lab Equipment III

Required Three Phase Transformer: power supply of 380 kV. Rated power no more than 800 VA. Primary: winding 3 400 V with tap at 230 V, can switch to star or delta connection. Secondary: 3 x 380 V winding Resistive load must be: 3 sy...



SPECIFICATION

Required Three Phase Transformer:

  • power supply of 380 kV. Rated power no more than 800 VA.
    1. Primary: winding 3 400 V with tap at 230 V, can switch to star or delta connection.
    2. Secondary: 3 x 380 V winding
    3. Resistive load must be: 3 synchronously adjustable circular rheostats each with a series resistor and a fuse in the sliding contact connection,  series, star-shaped and triangular circuits.
    4. Resistance: about 3 x 1000 Ohms.
    5. Series resistance: about 3 x 22 ohms.
    6. Current: 3 x 2.5A.
  • The power analyzer should be with opportunities for the following applications:
    1. In power networks: Stability of voltage and frequency, load behavior of networks
    2. In electrical machines: Inrush current from transformers and machines, transformation ratio of transformers.
  • Machine efficiency
    1. Power Electronics: Rectifier, AC and DC converters, frequency converter, filter.
    2. Power Analyzer  must have possibility  a combination of an isolated and differential oscilloscope, multimeter, wattmeter, energy analyzer and recorder.
    3. Averaged voltage, current;
    4. RMS voltage and current;
    5. Fundamental wave filters
  • Setting up a delta connection.
    1. Universal connectivity: via USB-port with a personal computer or laptop; via the option of wireless WLAN with a school network or setting up your own access point; automatic or manual range selection.
    2. Direct sequence component, reverse sequence component zero sequence component in three-phase systems: time derivative, time integral, FFT analysis, average value, histogram and model; The ability to manually control directly on the device using the rotary switch with the cursor keys;
    3. Must has a backlit display;
    4. Display up to 24 measured values ??on one display;
    5. Display of all values ??for each channel;
    6. Display of all values ??in tabular form;
    7. Display of measured values ??on a graph;
    8. Display a vector diagram.
    9. Providing opportunities wireless connection for experimenting with a tablet and smartphone (iOS, Android and Windows).
    10. Real-time processing in the device should allow a comprehensive analysis of the network in three-phase networks, which are displayed directly on the device in a vector diagram
    11. Equipment must comply with applicable standards. Acceptable "Variations ± 15% of the required parameter values, provided that such changes do not affect the intended functionality of the equipment"

Enquiry Form