Features:
Pressure distribution in convergent and divergent nozzles1
Three nozzles with different contours1
Speed of sound and shock wave
Convergent nozzles are used in the subsonic range. Velocities in the supersonic range can be achieved in de Laval nozzles; their nozzle geometry is a combination of convergent and divergent contours. De Laval nozzles are used in supersonic wind tunnels, steam turbines, jet engines, and rocket technology. Pressure curves are a good way of representing the different velocity ranges in the nozzle, such as subsonic, supersonic, and shock waves.
Tesca Pressure Distribution Nozzles Apparatus is used to measure pressure curves in convergent and convergent-divergent nozzles (de Laval nozzles) and to study the actual flow of compressible fluids. In addition, the "choking effect" is demonstrated, where the mass flow rate stops increasing upon reaching the critical pressure ratio. Air is used as a compressible fluid. In the experiment, the air flows through a nozzle and is thus accelerated. The pressure curve is recorded in the direction of flow over several measuring points. The air pressure upstream and downstream of the nozzle can be adjusted.
Three interchangeable nozzles are available to study the pressure and velocity ratios: one convergent contour and two de Laval nozzles with different length nozzle extensions.
The measured values for temperatures, pressures, and mass flow rate are recorded.
The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Specifications:
Nozzle pressure distribution in the actual flow of compressible fluids
Three nozzles with pressure measurement points: 1 convergent nozzle, 1 short, and 1 long de Laval nozzle
Compressed air regulator for adjusting the pressure downstream of the nozzle
Needle valve on the flow meter for adjusting the backpressure
Instruments: manometer and digital temperature display upstream and downstream of the nozzle as well as a rotameter

Technical Specifications:
Air consumption of the experimental unit
compressed air: max. 10bar
air consumption: approx. 5g/s 3 nozzles, brass
1 x de Laval nozzle, short nozzle extension
1 x de Laval nozzle, long nozzle extension
1 x convergent nozzle Compressed air regulator
control range: 0...8,6bar Measuring ranges
temperature: 0...100°C
pressure: 2x 0...10bar, 8x 1...9bar
mass flow rate: 0,7...8,3g/s
Compressed air connection max. 10bar, 250NL/min

Experiments:
1. Pressure curve in
De Laval nozzles
Convergent nozzles
2. Connection between inlet pressure and mass flow rate or exit pressure and mass flow rate
3. How pressure drop in the nozzle affects the temperature
4. Determining the critical pressure ratio (Laval pressure ratio)
5. Demonstration of the "choking effect"
6. Proof of shock waves