Order Code: 32749
Category: Technology Trainers
Tesca Automotive 4 Stroke 1 Cylinder Petrol Engine Test Bed 32749-32750 are designed to felicitate testing of different automobile petrol engines. The test bed is complete with eddy current dynamometer and measuring instruments for measuring key engi
Features
Tesca Automotive 4 Stroke 1 Cylinder Petrol Engine Test Bed 32749-32750 are designed to felicitate testing of different automobile petrol engines. The test bed is complete with eddy current dynamometer and measuring instruments for measuring key engine parameters required for performance analysis of an engine. The test bed can be used for testing of small petrol engines rated up to 500W.
The test bed consists of a water cooled eddy current dynamometer or Rope-Brake dynamometer, fixed on a heavy-duty steel frame. The test bed is designed in such a way that the engine to be tested can be quickly coupled to the dynamometer with minimum effort. The test bed is equipped with dynamometer control panel with necessary safety instruments. The Engines can be used for performance tests for different loads and speeds under various throttle opening conditions. The eddy current dynamometer provides a variable load on the engine, allowing the characteristic power and torque curves to be reproduced in the laboratory. The system comes complete with extensive instrumentation, including rpm measurement, torque (from which power can be calculated), plus various temperatures, Fuel Consumption, Air Consumption.
Different optional accessories are available to integrate with the Engine Test Bed for comprehensive engine performance analysis. These include the exhaust gas calorimeter (For Heat Balance Sheet), advance Data Acquisition System & P-V Diagram module for computerized testing.
Specifications
Eddy current or Rope-Brake Dynamometer: Capacity: 3.7KW, Water Cooled
Optional:
Rope brake dynamometer with loading unit
Electrically Dynamometer with loading unit
Dynamometer Controller
Engine: a. 481cc, Bore Dia: 87.5mm; Stroke Length: 80-mm; 1500 RPM; Petrol Engine mounted on mobile frame
(Note: Additional Engines can be supplied on request.)
Air Box with Orifice plate for Air flow measurement.
Fuel Tank: for Petrol.
Propeller shaft with protective covering.
Measuring Instruments –
Engine RPM Sensor
Differential Pressure Transmitter for Air
Fuel Level Sensor
Thermocouples
Torque Sensor
Accessories:
Battery for starting the engines
Set of Anti Vibration Pads
Auxiliary cooling unit for engine
Exhaust Gas Calorimeter (Optional)
Cooling Water Flow Transmitter
Pipe In pipe type heat exchanger
Thermocouples for water & gas temperature.
Data Acquisition System & Software (Optional)
Signal Converter
Data Acquisition Card, 16 Channel High speed DAQ Card with USB Port
Software: Labview based software for data acquisition, real time display, graphical representation, calculation & tabular results.
P-V Diagram Module (Optional)
Engine cylinder pressure
Crank angle Encoder
AutoSci-Cal® Engine Cycle Analyzer Module AMECA (Optional)
Features
Tesca AutoSci-Cal Engine Cycle Analyzer Module AMECA is a module with hardware and software to measure internal combustion engine cylinder pressure and crank angle.
Tesca AutoSci-Cal Engine Cycle Analyzer Module AMECA is a versatile module consisting of both hardware and software specially designed for educational use. It enables students to investigate the relationship between crank angle or volume and the cylinder pressure in an internal combustion engine. The equipment is primarily for use with engine test sets and engines but it can also be used with other engines fitted with compatible cylinder head transducers and crank angle encoders.
The equipment consists of a hardware unit with connectors and leads, plus Windows based data acquisition and analysis software. The hardware consists of a microprocessor-based signal conditioning unit with high-speed PC interface, housed in a rugged, protective enclosure. It accepts and conditions signals from the Cylinder Head Pressure Transducer and Crank Angle Encoder, pre-mounted on the engines. The cylinder pressure input includes a precision charge amplifier with a digital calibration. Crank angle position, the signal from the Crank Angle Encoder is also used to determine engine speed.
The output from the hardware unit connects to a computer (computer not included) running the Engine Cycle Analyser software. The hardware unit includes LED indicators to show the processor readiness, encoder top deadcentre position and PC communication status.
The software provides real-time display of pressure versus crank angle (p-q) and pressure versus volume (p-V)plots.
It performs calculations on the data to accurately display indicated mean effective pressure (IMEP) and indicated power for comparison with brake mean effective pressure (BMEP), and brake power to determine the mechanical efficiency of the test engine.
The software has useful snap-shot, replay and animation functions to help students visualise and better understand the engine cycle. The snap-shot and replay allow students to capture several engine cycles and study them using an animation showing the relative position of the crank, piston, inlet and exhaust valves. The software also allows students to create and recall engine configuration files for convenient entry of test engine data needed for calculations such as crank radius and engine swept volume. Data can also be exported to other software for further analysis.
Experiment Possibilities
Extra Ancillaries (fitted on engines)
Cylinder Head Pressure Transducer
Crank Angle Encoder
Recommended computer hardware:
Intel® Pentium® 4 or equivalent processor operating at 2 GHz
512 MB of RAM
SVGA monitor with 16-bit colour, 1024 x 768 resolution
CD-Rom drive
USB 1.1 or 2 port
500 MB of hard disc space
Two-button mouse
Operating system:
Microsoft® Windows XP, Vista, Windows 7 and 8
Standard Features
Supplied with comprehensive user guide
Made in accordance with the latest European Union Directives
Requirements:
Experiments
Scope of Delivery