SPECIFICATION

1.  Optical Fiber Requirements
   1.  Material : Silica Glass
   2.  Fiber count / Profile types : Single / SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657)
   3.  Fiber diameter : Cladding diameter (80 ~ 150 μm), Coating diameter (100 ~ 1,000 μm) d. Cleave length : 5 ~ 16mm with coating clamp
2.  Standard Performance
   1.  Splice loss (typical) : SMF (0.02dB), MMF (0.01dB), DSF (0.04dB), NZDSF (0.04dB)
   2.  Return loss (typical) : 60dB or greater
   3.  Splice time (typical) : 6sec (SM G652 Quick Mode), 8sec (Auto Mode)
   4.  Heating time (typical) : 15sec (FPS-61-2.6 sleeve, S60mm 0.25)
   5.  Splice Heat cycles per battery full charge : Approx. 300 (BU-16)
   6.  Fiber view magnification : 2 CMOS cameras observation, 350X (zoom : 700X) for X or Y single axis view, Max. 350 for both X Y dual axis view.
   7.  Proof test : 1.96 ~ 2.09N h. Applicable protection sleeve : 60mm, 40mm Nano sleeves
3.  Programs
   1.  Splice programs : Max. 300, 40 are pre-optimised, 260 editable by user
   2.  Heating programs : Max.100, 23 are pre-optimised, 77 editable by user
4.  Functions
   1.  Splice image capture / splice data storage : 200 images / 10,000 splice data (internal memory only) 50,200/20,000 (with 16GB SD card)
   2.  Universal clamps : Provided, 250 μm, 900 μm tight loose buffer fiber
   3.  Reversible coating clamps : Provided
   4.  Onboard user training video : Provided
   5.  Automatic fiber identification : SMF / MMF / Other f. Automatic arc calibration : Automatically compensates for environmental condition changes
   6.  Display of remaining Splice Heat cycles : Provided (Battery mode)
5.  Size / Weight
   1.  Size : 128 (W) x 154 (D) x 130 (H) mm (without anti-shock rubber)
   2.  Weight : 1.7kg (without battery) / 2.0kg (with Battery BU-16)
   3.  Monitor : 5.0” touch screen color LCD display
6.  Terminals
   1. DC output : DC 12V (for JR-6)
   2. USB port : USB 2.0 (mini-B type)
   3. Storage media : SD /SDHC memory card MAX32GB
7.  Operating Condition Altitude : 0 ~ 6,000m, Temperature : -10 ~ +50°C, Humidity : 0 ~ 95% (non- condensing), wind velocity : up to 15m/sec
8.  Storage condition Temperature :-40 ~ +80°C, Humidity : 0 ~ 95% (non-condensing), Battery : -20 ~ +30°C (long term)
9.  Electrode life - 6,000 arc discharges
10.  Software updates: Internet
11.  Data management: can be stored, edited and analyzed by dedicated PC software

 ACCESSORIES

1.  Accessories for Splicer
   1.  Fiber holder (FHS-025, FHS-09, FHS-025/LB5, FHD-1,1SM-ST, FHC-3)
   2.  Batter pack (BU-16(Li-ion 6,400mAh))
   3.  Battery charger (BC-16)
   4.  Car battery cable (PCV-16(Vehicle 12V outlet))
   5.  V-groove cleaning brush (VGT-2)
   6.  Electrode (ER-10)
2.  Accessories
   1.  Handheld fiber cleaver (FC-8R-FC (Auto blade rotation + cleave counter), FC-8R-F (Auto blade rotation))
   2.  Fiber cleaver (FC-6S-C (Table-top high precision cleaver), FC-6RS-C (Automatic blade rotation cleaver))
   3.  Jacket remover (JR-M03 (for single fiber))
   4.  Loose tube cleaver (LTC-01)
   5.  Automatic Alcohol dispenser bottle with twist lock (GR-3)
   6.  Fiber protection sleeve (FPS-1, FPS-40, FPS-61-2.6), 60mm length
   7.  2x G.652D Bare Fiber 2km/drum.
   8.  1x KIM Wipes Ex- Tissue
   9.  1x 2-Propanol, Reagent Grade (99% ALCOHOL), 4L

 POWER REQUIREMENT

1. Power supply
   1.  AC input : AC 100 ~ 240V, 50/60Hz (ADC-16)
   2.  DC input : DC 10 ~ 15V
   3. Battery pack : Li-ion 10.8V, 6,400mAh (BU-16)
2. Others All required cables such as AC (cord and adapter) and USB needed to make the equipment fully operational must be supplied.